Brother International PT-7500 Users Manual - English and Spanish - Page 91
Changing the, Language, after pressing
UPC - 012502620365
View all Brother International PT-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Appendix Problem The label is not printed after pressing p. The LCD messages are displayed in a foreign language. The label is not printed correctly. The ink ribbon is separated from the ink roller. Cause Has text been entered? Is the tape cassette installed correctly, and is there enough tape remaining? Is the end of the tape bent? Is the tape jammed? Is the tape compartment cover open? Is the language set properly? Is the tape cassette installed correctly? Is the print head clean? Is the rechargeable battery pack charged sufficiently? Is the ink ribbon in the tape cassette loose, or did you pull on the label coming out of the tape exit slot? Solution A label will not print if there is no text entered. Check that the tape cassette is installed correctly, and that there is enough tape remaining. If bent, cut the bent section of tape with scissors and thread the tape through the tape exit slot correctly. If jammed, remove the tape cassette, carefully pull out the jammed tape, and then cut the tape with scissors. Check that the end of the tape passes through the tape guide, and reinstall the tape cassette. If so, close the tape compartment cover correctly. Refer to Changing the Language on page 12 and select the desired language for the LCD messages. When installing a cassette, press firmly until it clicks into place. If not, clean the print head using a cotton swab or optional print head cleaning cassette (TZ-CL4). If the battery indicator comes on, charge the rechargeable battery pack. If the ink ribbon is broken, replace the tape cassette. If not, leave the tape uncut and remove the tape cassette, then wind the loose ink ribbon onto the spool as shown in the figure. Spool The P-touch labeler stops while printing a label. Is there enough tape remaining in the tape cassette? Are the batteries weak and is the AC adapter disconnected? The striped tape indicates you have reached the end of the tape. Replace the tape cassette when the striped tape appears. Replace all batteries or connect the AC adapter directly to the P-touch labeler. 75