Brother International RH-9820 Instruction Manual - English - Page 113
Replacing and adjusting the movable knife and fixed knife (for the lower thread and gimp) <-02 specifications>, 9-26-1. Replacing the movable knife and fixed knife, 9-26-2. Adjusting the cutting pressure
View all Brother International RH-9820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
9. STANDARD ADJUSTMENTS 9-26. Replacing and adjusting the movable knife and fixed knife (for the lower thread and gimp) 9-26-1. Replacing the movable knife and fixed knife 1. Remove the two screws (1), and then remove work clamp plate U (2). 2. Remove the nut (3). 3. Remove the shoulder screw (4), and then remove movable knife L (5) and movable knife R (6). 4. Install the new knives, and then install the shoulder screw (4). 5. Adjust the cutting pressure (see below), and then tighten the nut (3). 6. Install work clamp plate U (2). 0526B 9-26-2. Adjusting the cutting pressure Adjust the cutting pressure to the minimum pressure at which thread trimming can be carried out cleanly. 1. Loosen the nut (1). 2. Turn the shoulder screw (2) to adjust the cutting pressure. NOTE: If the shoulder screw (2) is tightened as far as it will go, the movable knives will no longer operate. Gradually loosen the shoulder screw (2) to a point where the movable knives turn smoothly. 3. Once adjustment is complete, securely tighten the nut (1). 0527B RH-9820 104