Brother International RH-9820 Instruction Manual - English - Page 43
Threading the threads when the cotton stand is installed on the right side
View all Brother International RH-9820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
4. PREPARATION BEFORE SEWING 4-5. Threading the threads when the cotton stand is installed on the right side When the cotton stand is installed on the right side, thread the threads through the parts shown inside the dotted lines below. The parts outside the dotted lines should be threaded in the same way as when the cotton stand is installed on the left side. Refer to "4-2" to "4-4" for details on threading each of the threads. • Before threading any of the threads, move the thread spool pin (1) to the position shown in the illustration, and then install the accessory thread spool pin (2). • When installing the cotton stand on the right side, it is recommended that you use the accessory thread guide (3). (4) Lower thread (5) Gimp (6) Upper thread Install the thread spool pins (1) and (2) so that their thread holes face as shown in the illustration below. Operator Direction of thread holes RH-9820 0405B 34