Brother International RH-9820 Instruction Manual - English - Page 33
Connecting the air tubes, 3-14-5. Securing the cords, enough slack in them so that
View all Brother International RH-9820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. INSTALLATION 3-14-4. Connecting the air tubes CAUTION Do not switch the insertion locations for air tube No. 5 and No. 6 by mistake. If they are not connected correctly, the hammer may be lowered when the power is turned on or when the air cock is opened, and serious injury may result. 1. Insert air tube No. 1 coming from the machine head into the nipple for the air unit assembly (1). (The numbers appear on the air tubes coming from the sewing machine. ) 2. Insert accessory air tube No. 5 and No. 6 into the nipples of the solenoid valve assembly (2) and bed base (3). (When setting up the machine head on top of the table, pass the air tubes through the table hole.) 3. Insert accessory air tube No. 2 into the nipples of the solenoid valve assembly (2) and venturi tube (4). 4. Bind the air tubes together using fastening bands (5). 3-14-5. Securing the cords 0372B NOTE: Secure the cords while leaving enough slack in them so that they do not get pulled when the machine head is tilted back. 1. Pass the cord bundle and the hammer valve harness through the accessory cord holder (large) (1), and secure the cord holder (large) (1) to the underside of the table with the screw (2). 2. Pass the air tubes and the valve cords through the accessory cord holder (small) (3), and secure the cord holder (small) (3) to the underside of the table with the screw (4). 0373B RH-9820 24