Brother International RH-9820 Instruction Manual - English - Page 114
Adjusting the movable knife installation position
View all Brother International RH-9820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
9. STANDARD ADJUSTMENTS 9-26-3. Adjusting the movable knife installation position (Viewed from directly above) (Viewed from underneath) (Viewed from the side at position B) 0528B 1. Remove work clamp plate U. (Refer to "9-26-1. Replacing the movable knife and fixed knife".) 2. Loosen the screw (1). 3. Turn the movable knife driving plate (4) so that the tip [A] of movable knife R (3) and the corner [C] of the needle plate (2) are aligned. 4. Turn thread trimmer lever arm B (7) until the thread trimmer link lever J assembly (5) touches against the screw (6), and then tighten the screw (1). 5. Once adjustment is complete, install work clamp plate U. NOTE: Check that the movable knife driving plate (4) and thread trimmer lever arm B (7) turn smoothly with no play. 105 RH-9820