Brother International TD-4750TNWB Users Guide - Page 19
Load Label Roll, 2 Auto-Calibrating the Media, Sensor using the BPM, Management Tool BPM or LCD
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5. Open the Roll Compartment Cover. Slide the Roll Guides outwards, and then align the paper width with the Roll Guides. Push down and slide the lock tab to lock the Roll Guides into place. 6. Install the label roll as described in section 3.2.1 Load Label Roll. 7. Feed the media through the media sensor. Adjust the Media Guide Tips to fit the label width. 8. Use the Brother Printer Management Tool (BPM) or LCD menu to set the media sensor type and calibrate the selected sensor. Media Guide Tips Note Calibrate the Gap/Black Mark Sensor every time you change the media. For more information about sensor calibration, see section 7.2 Auto-Calibrating the Media Sensor using the BPM. 15
15
5.
Open the Roll Compartment Cover.
Slide the Roll Guides outwards,
and then align the paper width with
the Roll Guides. Push down and
slide the lock tab to lock the Roll
Guides into place.
6.
Install the label roll as described in
section
3.2.1 Load Label Roll
.
7.
Feed the media through the media
sensor. Adjust the Media Guide
Tips to fit the label width.
8. Use the Brother Printer
Management Tool (BPM) or LCD
menu to set the media sensor type
and calibrate the selected sensor.
Note
Calibrate the Gap/Black Mark Sensor every time you change the media.
For more information about sensor calibration, see section
7.2 Auto-Calibrating the Media
Sensor using the BPM
.
Media Guide Tips