Home » Brother International Manuals » Label Makers » Brother International TD-4750TNWB » Manual Viewer

Brother International TD-4750TNWB Users Guide - Page 5

Introduction, 1.1 Product Introduction, 1.2 Additional Product Reference

View all Brother International TD-4750TNWB manuals

Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

1. Introduction 1.1 Product Introduction The sleek design of the TD-4650TNWB/4650TNWBR/4750TNWB/4750TNWBR label printer can handle up to 984 ft (300 m) of ribbon and label rolls. Its internal 5" (127 mm) label capacity can be further expanded with an External Roll Holder to handle 8" (203.2 mm) rolls, designed for industrial label printers. The printer's movable Black Mark Sensor is compatible with a wide range of label media. The printer uses its high-performance, high-quality, built-in Monotype Imaging® TrueType font engine with the CG Triumvirate Bold Condensed smooth scalable font. It also provides a choice of eight different sizes of the alphanumeric bitmap font. The printer's flexible firmware design allows users to download additional TrueType fonts from a computer to print custom labels. It also supports most of the standard barcode formats and can print fonts and barcodes in four directions. 1.2 Additional Product Reference For information on how to write custom programs for your Label Printer, see the Command Reference Manuals on your model's Manuals page at support.brother.com. 1

Section	Page
User's Guide TD-4650TNWB/4650TNWBR/TD-4750TNWB/4750TNWBR	1
Contents	3
1. Introduction	5
1.1 Product Introduction	5
1.2 Additional Product Reference	5
2. Operations Overview	6
2.1 Unpack the printer and check the components	6
2.2 Printer Overview	7
2.2.1 Front View	7
2.2.2 Interior View	8
2.2.3 Rear View	9
2.3 Connect the Power Cord	10
2.4 Control Panel	11
2.5 LED Indicator	12
3. Set Up Your Printer	13
3.1 Load the Ribbon	13
3.2 Load the Media	15
3.2.1 Load Label Roll	15
3.2.2 Install the External Roll Holder (Optional)	18
3.2.3 Install the Label Roll When Using the Cutter Module (Dealers only)	20
3.2.4 Install the Label Roll When Using the Label Peeler (Dealers only)	22
4. Printing	25
4.1 Printer Driver Installation	25
4.1.1 USB Connection (Windows/Mac/Linux)	25
4.1.2 Bluetooth Connection (Windows)	26
4.1.3 Wi-Fi Network Connection (Windows)	26
4.1.4 Wired Network Connection (Windows)	27
4.2 Creating and Printing Labels Using BarTender	28
5. Operation	30
5.1 Power-on Utilities	30
5.1.1 Ribbon and Gap/Black Mark Sensor Calibration	31
5.1.2 Gap/Black Mark Sensor Calibration, Self-Test, and Entering Dump Mode	31
5.1.3 Printer Initialization	35
5.1.4 Media Sensor Calibration (for the Black Mark Sensor)	36
5.1.5 Media Sensor Calibration (for the Gap Sensor)	36
5.1.6 Skip the AUTO.BAS program	36
6. LCD Overview	37
6.1 Access the Main Menu	37
6.2 Main Menu Overview	38
6.3 Setting Menu	39
6.3.1 FBPL Settings	39
6.3.2 ZPL2 Settings	41
6.4 Sensor Settings	43
6.5 Interface Settings	44
6.5.1 Serial Communication Settings	45
6.5.2 Ethernet Settings	45
6.5.3 Wi-Fi Settings	46
6.5.4 Bluetooth Settings	47
6.5.5 RFID (Radio Frequency Identification) Settings	48
6.6 Advanced Settings	54
6.7 File Manager	55
6.8 Diagnostic Functions	56
7. Brother Printer Management Tool (BPM)	57
7.1 Start the BPM	57
7.2 Auto-Calibrating the Media Sensor using the BPM	58
8. Setting up the RFID	59
8.1 Introduction	59
8.2 RFID Calibration (available for TD-4650TNWBR and TD-4750TNWBR only)	60
8.2.1 Select the Antenna Position	60
8.2.2 RFID Calibration Procedure	60
9. Product Specifications	63
10. Troubleshooting	66
10.1 Common Problems	66
10.2 RFID Error Messages	69

Match case Limit results 1 per page

1. Introduction

1.1 Product Introduction

The sleek design of the TD-4650TNWB/4650TNWBR/4750TNWB/4750TNWBR label printer

can handle up to 984 ft (300 m) of ribbon and label rolls. Its internal 5" (127 mm) label capacity

can be further expanded with an External Roll Holder to handle 8" (203.2 mm) rolls, designed

for industrial label printers. The printer's movable Black Mark Sensor is compatible with a wide

range of label media.

The printer uses its high-performance, high-quality, built-in Monotype Imaging

TrueType font

engine with the CG Triumvirate Bold Condensed smooth scalable font. It also provides a

choice of eight different sizes of the alphanumeric bitmap font. The printer's flexible firmware

design allows users to download additional TrueType fonts from a computer to print custom

labels. It also supports most of the standard barcode formats and can print fonts and barcodes

in four directions.

1.2 Additional Product Reference

For information on how to write custom programs for your Label Printer, see the

Command

Reference Manuals

on your model's

Manuals

page

support.brother.com