Brother International TD-4750TNWB Users Guide - Page 42
Setting, Description, Print Mode, Action, List Setup
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setting Darkness Description Set up the print darkness. Settings range from 0 to 30. You may need to adjust the print density based on the selected media. Print Speed Tear Off Print Mode Set up the print speed. Settings range from: 2 to 8 for 203 dpi 2 to 6 for 300 dpi Fine-tune the media stop location. Settings range from -120 dots to 120 dots. Set the print mode. Print Mode Tear Off Description The top of the next label is aligned with the Print Head burn line. Peeler Off Enable the label Peeler Off mode. Cutter Enable the label Cutter mode. Print Width Set the print width. Settings range from: 2 dots to 864 dots for 203 dpi 2 dots to 1248 dots for 300 dpi List Fonts Print the current printer fonts list to the label. The fonts can be stored in the printer's DRAM, Flash, or optional memory card. List Images Print the current printer images list to the label. The images can be stored in the printer's DRAM, Flash, or optional memory card. List Formats Print the current printer formats list to the label. The formats can be stored in the printer's DRAM, Flash, or optional memory card. List Setup Print the current printer configuration. Control Prefix Set the control prefix character. Format Prefix Set the format prefix character. Delimiter Char Set the delimiter character. Media Power Up Set the media action you want when you turn the printer on. Action Description Feed The printer ejects one label. Calibration The printer calibrates the sensor levels, determines the label length, and feeds one label. Length The printer determines the label length and feeds the label. No Motion No action. 38