Brother International TD-4750TNWB Users Guide - Page 21
Printer Configuration, CUTTER, Post-Print Action, Feed/Pause
![]() |
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6. Close the Roll Compartment Cover. 7. Use the Brother Printer Management Tool (BPM) to set the printer for Cutter Mode. a. Start the BPM. b. Click the Printer Configuration button. c. Click the FBPL tab. d. Click the CUTTER option from the Post-Print Action drop-down list. e. Click Set. f. Press the Feed/Pause button to test. Note Calibrate the Gap/Black Mark Sensor every time you change the installed media. For more information about sensor calibration, see section 7.2 Auto-Calibrating the Media Sensor using the BPM. Printer settings can also be changed using the LCD. 17
![](/manual_guide/products/brother-international-td4650tnwb-users-guide-c8c8849/21.png)
17
6. Close the Roll Compartment
Cover.
7.
Use the Brother Printer Management Tool (BPM) to set the printer for Cutter Mode.
a. Start the BPM.
b. Click the
Printer Configuration
button.
c. Click the
FBPL
tab.
d. Click the
CUTTER
option from the
Post-Print Action
drop-down list.
e. Click
Set
.
f. Press the
Feed/Pause
button to test.
Note
Calibrate the Gap/Black Mark Sensor every time you change the installed media.
For more information about sensor calibration, see section
7.2 Auto-Calibrating the
Media Sensor using the BPM
.
Printer settings can also be changed using the LCD.