Brother International TD-4750TNWB Users Guide - Page 49
Control, Active, Error, Handling, Label, Retry, Max Retry, EPC Write, Non-RFID, Warning, Description
![]() |
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Item Control Description RFID Active Error Handling Select "Enable" to enable the RFID encoder module. Select the error handling mode for RFID errors. Overstrike (Default) Each incorrectly processed label prints with the Overstrike pattern, and the form retries on a new label until the Label Retry count is exhausted. Whether an error message appears or the label gets reprinted depends on the Max Retry Error setting. None No specific action is taken when a tag fails to be programmed. Stop The printer will halt and display the error message "RFID Error: Check Media". The label is discarded and reprinting of the label must be initiated from the host. When the error is cleared, the label with the incorrect tag moves forward until the next label is in position to be printed. Label Retry Specifies the number of label retries that the RFID encoder will attempt before declaring a fault. This may indicate a problem with the RFID encoder, the printer setup, or the label stock. Minimum Maximum 1 10 (Default) Max Retry Error EPC Write Ctrl Non-RFID Warning Determines if errors occur when the Label Retry count is exceeded. Controls how the printer encodes the RFID tag EPC field. Displays a warning if the printer receives a print job that does not contain any RFID commands when RFID media is installed in the printer. 45
![](/manual_guide/products/brother-international-td4650tnwb-users-guide-c8c8849/49.png)