Brother International TD-4750TNWB Users Guide - Page 51

RFID Chip, Param, USR Size, Address, TID Size, Higgs 3, USR Len, EPC Len

Page 51 highlights

Item Description These settings are used to configure the system when custom RFID tags are required. USR Size Specifies the USR block bytes size within the RFID tag memory. Normally, this value is set automatically by the RFID calibration process and should not be changed. Minimum Maximum 0 (Default) 256 Note This value is hidden if Higgs 3 tags are detected, and the Higgs 3 USR Len menu is shown instead. USR Address Specifies the starting location of the USR block within the RFID tag memory. Normally, this value is set automatically by the RFID calibration process and should not be changed. Minimum Maximum 0 (Default) 32 RFID Chip Param TID Size Higgs 3 USR Len Higgs 3 EPC Len Indicates the size of the memory block within the RFID tag memory that contains the Tag ID. Normally, this value is set automatically by the RFID calibration process and should not be changed. Minimum 0 Maximum 12 Default 8 Higgs 3 tags differ from other RFID tags in that their memory bank size is not fixed. To accommodate EPC lengths longer than 96 bits, Higgs 3 borrows memory from the USR bank. This read-only menu indicates the size in bits of the USR block within the RFID tag memory. Minimum Maximum 128 512 (Default) Note This menu will only be shown if a Higgs 3 tag is detected. Higgs 3 tags differ from other RFID tags in that their memory bank size is not fixed. To accommodate EPC lengths longer than 96 bits, Higgs 3 borrows memory from the USR bank. This menu item allows you to select the number of bits dedicated to the EPC block within the RFID tag memory. Minimum 96 Maximum 480 Default 96 Note This menu will only be shown if a Higgs 3 tag is detected. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73

47
Item
Description
RFID Chip
Param
These settings are used to configure the system when custom RFID tags are
required.
USR Size
Specifies the USR block bytes size within the RFID tag
memory. Normally, this value is set automatically by the
RFID calibration process and should not be changed.
Minimum
0 (Default)
Maximum
256
Note
This value is hidden if Higgs 3 tags are detected, and the
Higgs 3 USR Len menu is shown instead.
USR
Address
Specifies the starting location of the USR block within the
RFID tag memory. Normally, this value is set automatically
by the RFID calibration process and should not be changed.
Minimum
0 (Default)
Maximum
32
TID Size
Indicates the size of the memory block within the RFID tag
memory that contains the Tag ID. Normally, this value is set
automatically by the RFID calibration process and should
not be changed.
Minimum
0
Maximum
12
Default
8
Higgs 3
USR Len
Higgs 3 tags differ from other RFID tags in that their memory
bank size is not fixed. To accommodate EPC lengths longer
than 96 bits, Higgs 3 borrows memory from the USR bank.
This read-only menu indicates the size in bits of the USR
block within the RFID tag memory.
Minimum
128
Maximum
512 (Default)
Note
This menu will only be shown if a Higgs 3 tag is
detected.
Higgs 3
EPC Len
Higgs 3 tags differ from other RFID tags in that their memory
bank size is not fixed. To accommodate EPC lengths longer
than 96 bits, Higgs 3 borrows memory from the USR bank.
This menu item allows you to select the number of bits
dedicated to the EPC block within the RFID tag memory.
Minimum
96
Maximum
480
Default
96
Note
This menu will only be shown if a Higgs 3 tag is
detected.