Brother International TD-4750TNWB Users Guide - Page 62
Using the LCD Menu, Interface, Tag Calibration, Do RFID, Calibrate, Using the RFIDDETECT command
![]() |
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3. Start RFID Calibration. Using the LCD Menu: Go to the RFID menu. Select Interface Calibrate, and select the icon. RFID Tag Calibration Do RFID Note For more information, see section 6.5.5 RFID (Radio Frequency Identification) Settings. Using the RFIDDETECT command: Note For more information, see the FBPL Command Reference Manual on your model's Manuals page at support.brother.com. 4. Depending on the tag type and tag length, the calibration can take several minutes. At the end of calibration either a green or red screen appears. The green screen appears when the calibration is successful and the red one when it is not. 5. If calibration fails, select the or icon to clear the error. In most cases when this error occurs, it is necessary to reposition the Antenna Slide. In some cases, it may be due to an incompatibility between the tag and the reader. After the calibration is complete, select the or icon to continue and save the RFID calibration values. 58
![](/manual_guide/products/brother-international-td4650tnwb-users-guide-c8c8849/62.png)