Brother International TD-4750TNWB Users Guide - Page 53
Diagnostics, Read USR, Read TID, Tag ID, Read PC, Tag PC, Write EPC, with 1s, with 2s
![]() |
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Item Description Read USR Reads the User Memory bank of the tag in range of the internal RFID coupler and reports the data to the debug port and displays it on the LCD. It is primarily intended for development verification by checking that the system is working. Note This menu item does not position the RFID tag over the coupler. Make sure to position the tag over the coupler to receive an accurate reading. Read TID Reads the Tag ID (TID) from the tag in range of the internal RFID coupler and displays the value read in the Tag ID menu. Note This menu item does not position the RFID tag over the coupler. Make sure to position the tag over the coupler to receive an accurate reading. Tag ID Read PC Diagnostics Displays the first Tag ID (TID) read since power-up, or if using the Read TID menu, the most recently read TID. If no tag is in range of the internal RFID coupler, "Unknown" appears on the LCD. Reads the PC (Protocol Control) field from an RFID tag in range of the internal RFID coupler and displays the value read in the Tag PC menu. Note This menu item does not position the RFID tag over the coupler. Make sure to position the tag over the coupler to receive an accurate reading. Tag PC Displays the last PC (Protocol Control) field read from an RFID tag. If no tag is in range of the internal RFID coupler, "Unknown" appears on the LCD. Write EPC Writes all ones to the tag in range of the internal RFID with 1s coupler. It is primarily intended for development verification by checking that the system is working. Note This menu item does not position the RFID tag over the coupler. Make sure to position the tag over the coupler to receive an accurate writing. Write EPC Writes all twos to the tag in range of the internal RFID with 2s coupler. It is primarily intended for development verification by checking that the system is working. Note This menu item does not position the RFID tag over the coupler. Make sure to position the tag over the coupler to receive an accurate writing. 49
![](/manual_guide/products/brother-international-td4650tnwb-users-guide-c8c8849/53.png)