Brother International TD-4750TNWB Users Guide - Page 40
Speed, Density, Direction, Print Mode, Offset, Shift X, Reference X, Code Country, Setting
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Setting Speed Density Direction Set up the print speed. Description Adjust the print darkness/lightness. Settings range from 0 to 15. You may need to adjust the print density based on the media. Specify print direction. DIRECTION 0 DIRECTION 1 FEED Print Mode Offset Shift X Shift Y Reference X Reference Y Code Page Country Set the print mode. Print Mode None Batch Mode Peeler Mode Cutter Mode Cutter Batch Description The top of the next label is aligned with the Print Head burn line (Tear Off Mode). When the image is printed, the Gap/Black Mark is fed through the tear plate for tear away. Enables label Peeler Mode. Enables label Cutter Mode. Cuts the label once at the end of the printing job. Fine-tune the media stop location. Settings range from -999 dots to 999 dots. Fine-tune the print position. Settings range from -999 dots to 999 dots. Set the origin of the printer coordinate system horizontally and vertically. Settings range from 0 dots to 999 dots. Set the international character set code page. Set the country code. Settings range from 1 to 358. Note If printing from the downloaded software/driver, the software/driver commands will overwrite the settings set from the LCD. 36