Brother International TD-4750TNWB Users Guide - Page 50
Calibration, Calibrate, Num Label, Test EPC, Length, Param, Position, Write, Power
![]() |
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Item Tag Calibration Description This submenu is used to perform an RFID calibration. The user must perform a tag calibration when installing a new tag in the printer. RFID calibration determines the RFID chip type, the write/read power, program position, and the length of the EPC/User field. RFID Calibrate Performs the RFID calibration. Execute it every time you change the RFID tag type. Num Label for Calibration Determines the number of tags to use for calibration. However, this value does not include tags moved when seeking gaps during the calibration process. Depending on the difficulty in calibrating the installed tags, the printer may use more or fewer labels, but generally, the greater the number selected in this menu, the more tags will be used to determine the calibration result. The default value (3) is most commonly used. Minimum Maximum 3 (Default) 7 Test EPC Length Determines the size of the EPC data that will be used to perform the RFID calibration. This length can be increased to improve the accuracy of the RFID calibration, but it should not be increased to a value greater than the maximum EPC length that the current Tag Type can support. Minimum 16 Maximum 256 Default 96 Calibration Param Contains the settings used for optimal tag encoding. These parameters can be obtained automatically through RFID calibration. Tag Position Determines how far the RFID tag encoding position of the currently installed tag should be offset from Top of Form. Write Power Specifies the write power level to be used in the RFID encoder. Normally, this value is set automatically by the RFID calibration process and should not be changed. Minimum 1 Maximum 30 Read Power Specifies the read power level to be used in the RFID encoder. Normally, this value is set automatically by the RFID calibration process and should not be changed. Minimum 1 Maximum 30 46
![](/manual_guide/products/brother-international-td4650tnwb-users-guide-c8c8849/50.png)