Brother International TD-4750TNWB Users Guide - Page 69

RFID Error Messages, Error Message, Possible Cause, Solution

Get Brother International TD-4750TNWB PDF manuals and user guides View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

10.2 RFID Error Messages The RFID encoder can detect several errors. When these errors occur, the RFID encoder alerts the printer and the LCD displays the appropriate error message. Error Message Possible Cause Solution RFID Is Disabled The RFID function is not Select RFID > Control > RFID Active to enable activated. the RFID function. Failure EPC Write Failed The EPC tag cannot be  The label could be misaligned. Perform the written via Diagnostics > Sensor > Auto Calibration procedure to ensure Write EPC with 1s or the label is at top-of-form. Write EPC with 2s.  Select RFID > Control > Tag Calibration > RFID Calibrate.  Use smart labels with RFID tags located in the correct position.  The RFID tag could be defective. Try another tag.  Make sure the application does not send too few or too many digits to the RFID tag. RFID Calibrate Write Tag Failed Tag calibration cannot be  The label could be misaligned. Perform the performed. Sensor > Auto Calibration procedure to ensure the label is at top-of-form.  Use smart labels with RFID tags located in the correct position.  The RFID tag could be defective. Try another tag. RFID Disabled The RFID command is sent to the printer when the RFID function is disabled. 1. Select RFID > Control > RFID Active to enable the RFID function. 2. Then send RFID commands. NON-RFID DATA On RFID Tag When the "Non- RFID warning" option is "ON" (RFID > Control > Non-RFID Warning), the printer has obtained the non-RFID data. Make sure you send RFID commands to the printer. INVALID RFID DATA The RFID tag data sent does not match the settings. Check the tag data of the RFID commands. INVALID RFID DATA LEN The tag length size (the size parameter of RFID command) sent does not match the setting. Check the data length size of the RFID commands. 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
65
10.2
RFID Error Messages
The RFID encoder can detect several errors. When these errors occur, the RFID encoder
alerts the printer and the LCD displays the appropriate error message.
Error Message
Possible Cause
Solution
RFID Is
Disabled
The RFID function is not
activated.
Select
RFID
>
Control
>
RFID Active
to enable
the RFID function.
Failure
EPC Write Failed
The EPC tag cannot be
written via
Diagnostics
>
Write EPC with 1s
or
Write EPC with 2s
.
The label could be misaligned. Perform the
Sensor
>
Auto Calibration
procedure to ensure
the label is at top-of-form.
Select
RFID
>
Control
>
Tag Calibration
>
RFID
Calibrate
.
Use smart labels with RFID tags located in the
correct position.
The RFID tag could be defective. Try another tag.
Make sure the application does not send too few
or too many digits to the RFID tag.
RFID Calibrate
Write Tag Failed
Tag calibration cannot be
performed.
The label could be misaligned. Perform the
Sensor
>
Auto Calibration
procedure to ensure
the label is at top-of-form.
Use smart labels with RFID tags located in the
correct position.
The RFID tag could be defective. Try another tag.
RFID
Disabled
The RFID command is
sent to the printer when
the RFID function is
disabled.
1. Select
RFID
>
Control
>
RFID Active
to
enable the RFID function.
2. Then send RFID commands.
NON-RFID DATA
On RFID Tag
When the "Non- RFID
warning" option is "ON"
(
RFID
>
Control
>
Non-RFID Warning
), the
printer has obtained the
non-RFID data.
Make sure you send RFID commands to the
printer.
INVALID RFID
DATA
The RFID tag data sent
does not match the
settings.
Check the tag data of the RFID commands.
INVALID RFID
DATA LEN
The tag length size (the
size parameter of RFID
command) sent does not
match the setting.
Check the data length size of the RFID
commands.