Brother International TD-4750TNWB Users Guide - Page 43
Sensor Settings, Head Close, Label Top, Left Position, Reprint Mode, Format, Convert
View all Brother International TD-4750TNWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setting Head Close Description Set the media action when you close the Print Head. Action Description Feed The printer ejects one label. Calibration The printer calibrates the sensor levels, determines the label length, and feeds one label. Length The printer determines the label length and feeds the label. No Motion No action. Label Top Left Position Reprint Mode Format Convert Adjust the print position vertically on the label. Settings range from -120 dots to +120 dots. Adjust the print position horizontally on the label. Settings range from -9999 dots to +9999 dots. Reprint the last label by pressing the Up arrow (△) button on the control panel. Selects the bitmap scaling factor. The first number is the original DPI value; the second number is the DPI setting you want. Note If printing from the downloaded software/driver, the software/driver commands will overwrite the settings set from the LCD. 6.4 Sensor Settings We recommend calibrating the sensors every time you change the media. Menu Sensor Auto Calibration Manual Calibration Threshold Detect Maximum Length Gap/Bline Ref Rate Advanced Gap Black Mark Continuous Preprint Standard Auto Fixed Gap Ref Rate Bline Ref Rate Min. Paper Max. Gap/Mark Gap Black Mark Continuous 39