Canon EOS Rebel T2i EOS REBEL T2i / EOS 550D Instruction Manual - Page 31
Installing and Removing the SD Card
View all Canon EOS Rebel T2i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing and Removing the SD Card The captured images are recorded onto the card (sold separately). Make sure the card's write protect switch is set upward to enable writing/erasing. Installing the Card 1 Open the cover. Slide the cover as shown by the arrow to open it. Write protect switch 2 Insert the card. As shown by the illustration, face the card's label side toward you and insert it until it clicks in place. 3 Close the cover. Close the cover and slide it in the direction shown by the arrow until it snaps shut. When you set the power switch to , the number of possible shots will be displayed on the LCD monitor. Possible shots The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting the [1 Release shutter without card] menu option to [Disable] will prevent you from forgetting to install a card (p.138). 31