Canon FS21 FS20/FS21/FS22/FS200 Instruction Manual - Page 103
Direct Print Related Messages
UPC - 705105064819
View all Canon FS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Direct Print Related Messages CANNOT PRINT! - You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer. CHECK PRINT SETTINGS - Current print settings cannot be used for printing with the button. COMMUNICATION ERROR - The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing using the button, check the print settings. Or, you attempted to print from a memory card that contains a large number of photos. Reduce the number of photos. COULD NOT PRINT X PHOTOS - You attempted to use the print order settings to print X photos that were recorded with another camcorder, with a different compression or were edited on a computer. FILE ERROR - You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer. HARDWARE ERROR - Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on. INCOMPATIBLE PAPER SIZE - The paper settings of the camcorder conflict with the printer's settings. INK ABSORBER FULL - Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber. INK ERROR - There is a problem with the ink. Replace the ink cartridge. LOW INK LEVEL - The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing. NO INK - The ink cartridge is not inserted or is out of ink. NO PAPER - Paper is not correctly inserted or there is no paper. NO PRINTHEAD - No print head is installed in the printer or the print head is defective. PAPER ERROR - There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong. Alternatively, if the paper output tray is closed, open it to print. 103