Canon FS21 FS20/FS21/FS22/FS200 Instruction Manual - Page 94

Recording, Playback

Page 94 highlights

Additional Information After using the camcorder for a long time, it becomes hot. - The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction. If it becomes hot very quickly or it becomes too hot to touch, it may indicate a problem with the camcorder. Consult a Canon Service Center. The battery pack is exhausted extremely quickly even at normal temperatures. - The battery may have reached the end of its battery life. Buy a new battery pack. Recording Pressing Start/Stop will not start recording. - You cannot record while the camcorder is writing previous recording onto the memory (while the ACCESS indicator is on or flashing). - The memory is full or it already contains 3,999 scenes (the maximum number of scenes). Delete some recordings ( 43) or initialize the memory ( 32) to free some space. The point where Start/Stop was pressed does not match the beginning/end of the recording. - There is a slight interval between pressing Start/Stop and the actual start of recording. This is not a malfunction. - When the pre-recording function is used, the beginning of the scene will differ from when Start/Stop was pressed. The camcorder will not focus. - Autofocus does not work on the subject. Focus manually ( - Lens is dirty. Clean the lens with a soft lens-cleaning cloth ( 51). 108). Never use tissue paper to clean the lens. A vertical light bar appears on the screen. - Bright light in a dark scene may cause a vertical light bar (smear) to appear. This is not a malfunction. Changing the operating mode between recording ( )/record pause ( )/playback ( ) takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 77) and initialize the memory ( 32). Movies or photos cannot be recorded properly. - This may occur as movies and photos are recorded/deleted over time. Back up your recordings ( initialize the memory ( 32). 77) and Playback Cannot add scenes to the playlist. - The playlist cannot contain more than 99 scenes or 100 hours of scenes. - You may not be able to add scenes to the playlist if they were recorded or edited using another device. Cannot delete a scene. - You may not be able to delete scenes recorded or edited using another device. Deleting scenes takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 77) and initialize the memory ( 32). 94

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123

Additional Information
94
After using the camcorder for a long time, it becomes hot.
-
The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction.
If it becomes hot very quickly or it becomes too hot to touch, it may indicate a problem with the camcorder.
Consult a Canon Service Center.
The battery pack is exhausted extremely quickly even at normal temperatures.
-
The battery may have reached the end of its battery life. Buy a new battery pack.
Recording
Pressing
will not start recording.
-
You cannot record while the camcorder is writing previous recording onto the memory (while the ACCESS
indicator is on or flashing).
-
The memory is full or it already contains 3,999 scenes (the maximum number of scenes). Delete some
recordings (
43) or initialize the memory (
32) to free some space.
The point where
was pressed does not match the beginning/end of the recording.
-
There is a slight interval between pressing
and the actual start of recording. This is not a
malfunction.
-
When the pre-recording function is used, the beginning of the scene will differ from when
was
pressed.
The camcorder will not focus.
-
Autofocus does not work on the subject. Focus manually (
51
).
-
Lens is dirty. Clean the lens with a soft lens-cleaning cloth (
108
). Never use tissue paper to clean the lens.
A vertical light bar appears on the screen.
-
Bright light in a dark scene may cause a vertical light bar (smear) to appear. This is not a malfunction.
Changing the operating mode between recording (
)/record pause (
)/playback (
) takes longer than
usual.
-
When the memory contains a large number of scenes, some operations may take longer than usual. Back up
your recordings (
77) and initialize the memory (
32).
Movies or photos cannot be recorded properly.
-
This may occur as movies and photos are recorded/deleted over time. Back up your recordings (
77) and
initialize the memory (
32).
Playback
Cannot add scenes to the playlist.
-
The playlist cannot contain more than 99 scenes or 100 hours of scenes.
-
You may not be able to add scenes to the playlist if they were recorded or edited using another device.
Cannot delete a scene.
-
You may not be able to delete scenes recorded or edited using another device.
Deleting scenes takes longer than usual.
-
When the memory contains a large number of scenes, some operations may take longer than usual. Back up
your recordings (
77) and initialize the memory (
32).
Start/Stop
Start/Stop
Start/Stop
Start/Stop