Canon FS21 FS20/FS21/FS22/FS200 Instruction Manual - Page 95
Indicators and Onscreen Displays
UPC - 705105064819
View all Canon FS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Cannot erase a photo - The photo is protected. Remove the protection ( 67). Cannot play back a music track. - If the music tracks were erased when the memory was initialized, use the supplied software Music Transfer Utility to transfer the music files on the supplied Instruction Manual/Music Data Disc CD-ROM. For details, refer to the software's instruction manual (PDF file). When playing back recordings combined with music, the video and audio do not play back correctly (playback skips or stops). - This occurs when music files are transferred and there is not enough available space in the memory (about 5 times more than the size of the music files). Make sure there is enough space and then transfer the music files again. When playing a slideshow, it takes longer than usual for the photos to advance or there are brief stops in the audio. - This may occur when using a memory card with no Speed Class rating or playing back photos recorded with another device. Play back photos taken with this camcorder from a memory card rated Speed Class 2 or higher. Indicators and Onscreen Displays lights up in red. - Battery pack is exhausted. Replace or charge the battery pack ( 19). appears on the screen. - The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed. lights up in red. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card ( 32) if the display does not change back to normal. - The memory card is full. Replace the memory card or delete some recordings ( 43, 65) to free some space on the memory card. The ON/OFF(CHG) (power/charge) indicator flashes rapidly while the camcorder is charging. - (one flash at 0.5-second intervals) Charging has stopped because the compact power adapter or the battery pack is faulty. Consult a Canon Service Center. The ON/OFF(CHG) (power/charge) indicator flashes very slowly while the camcorder is charging. - (one flash at 2-second intervals) The battery pack's temperature has either fallen below 0 °C (32 °F) or risen above 40 °C (100 °F). If the battery pack is too cold, warm it up. If the battery pack is too hot, let it cool down until its temperature is below 40 °C (100 °F). - Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F). - The battery pack is damaged. Use a different battery pack. 95