Canon FS21 FS20/FS21/FS22/FS200 Instruction Manual - Page 91
Quick Start], Tv Type], Usb Setting], Firmware]
UPC - 705105064819
View all Canon FS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
• In standby mode, the camcorder will shut off after the time selected for the [QUICK START] setting. • The Power Save mode cannot be set while the compact power adapter is connected to the camcorder. [QUICK START]: Select whether to activate the Quick Start function ( 37) when you close the LCD panel in a recording mode and the length of time after which the camcorder will end the standby mode and shut off automatically. [SPEAKER VOL.]: Adjust ( ) the volume of the playback. You can also adjust the volume using the joystick guide ( 38). [TV TYPE]: In order to display the picture in full and in the correct aspect ratio, select the setting according to the type of television to which you will connect the camcorder. [ NORMAL TV]: TV sets with 4:3 aspect ratio. [ WIDE TV]: TV sets with 16:9 aspect ratio. • When the TV type is set to [ NORMAL TV], the picture displayed on the LCD screen will be smaller than the full display area. [USB SETTING]: Select the connection protocol to use when connecting the camcorder to an external device using the USB cable. [ DVD BURNER]: To connect exclusively to the optional DW-100 DVD Burner. [ PC/PRINTER]: To connect to a computer, a printer or similar USB peripherals. [ CONNECT&SET]: To make the selection from a screen that appears at the time of the connection to the external device. [PHOTO NOS.]: Select the photo numbering method to be used on a new memory card. Photos are automatically assigned consecutive photo numbers from 0101 to 9900, and stored in folders containing up to 100 photos. Folders are numbered from 101 to 998. [ RESET]: Photo numbers will restart from 101-0101 every time you insert a new memory card. [ CONTINUOUS]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder. • If the memory card you insert already contains a photo with a larger number, a new photo will be assigned a number one higher than that of the last photo on the memory card. • We recommend using the [ CONTINUOUS] setting. [FIRMWARE]: You can verify the current version of the camcorder's firmware. This menu option is usually unavailable. 91