Canon PIXMA mini260 Photo Printing Guide - Page 12
Turning On/Off the Printer - setup
View all Canon PIXMA mini260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Turning On/Off the Printer This section describes the method to turn on/off the printer. Turning On the Printer Ensure that the Print Head and ink tank are installed, before turning on the printer. Note If the Print Head and ink tank are not installed, refer to the Easy Setup Instructions (Setup Sheet) to install them. 1 Plug the AC Adapter and connect the other end to a power outlet. 2 Open the Paper Feed Tray and press the ON/OFF button to turn the printer on. The POWER lamp flashes then changes to steady (non-flashing). The HOME screen appears on the LCD. Note If the Alarm lamp is lit orange and an error message is displayed on the LCD, see "Error Message Is Displayed on the LCD" in "Troubleshooting" on page 55. Turning Off the Printer Check the following before turning off the printer. The Access lamp of the memory card is not flashing. The printer is not operating. Important Data in the memory card may be damaged if you remove the memory card or turn off the printer when the Access lamp is flashing. 1 Turn off the printer by pressing the ON/OFF button. The POWER lamp goes out and the power will be turned off. Note Power cord Before unplugging the power cord, turn off the printer and ensure that the POWER lamp has gone out. You may not be able to print afterward if you unplug the power cord when the POWER lamp is lit or flashing. 10 Before Printing Access lamp