Canon Pro1 PowerShot Pro1 Camera User Guide - Page 112
Compensating the Flash Output
UPC - 013803034899
View all Canon Pro1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Switching between Flash Adjustment Settings (continued) 3 Press the FUNC. button or click the main dial. z To cancel the compensation, return the setting to . Compensating the Flash Output In M mode or when [Flash Adjust] is set to [Manual], the flash output can be controlled in three steps, starting from FULL, when shooting. This setting is also active with slave flash photography where multiple flashes are fired at the subject from different positions because the pre-flash does not fire. When an externally mounted flash is attached, its flash output can be controlled (Up to 1/16 from Full, in 1/3 steps). 1 Press the FUNC. button, then select or T arrow on the omni selector. using the S 2 Adjust the output using the main dial or the W or X arrow on the omni selector. z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 3 Press the FUNC. button or click the main dial. 108