Canon Pro1 PowerShot Pro1 Camera User Guide - Page 35

Preparing the Camera, Basic Functions Turning on the camera without the start-up sound and image Press and hold the button, then turn on the power. You can also turn the camera on with the LCD monitor closed. Power Saving Function This camera is equipped with a power saving function. When this function is turned on and it activates, restore power by turning the mode lever toward or . Shooting Mode: Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor (or viewfinder) also shuts off approximately 1 minute* after the last control is accessed on the camera. Press any button except the mode lever to turn the LCD monitor (or viewfinder) back on. * This time can be changed (p. 50). Playback Mode: Powers down approximately 5 minutes after the last control is accessed on the camera. Printer Connection Mode: Powers down approximately 5 minutes after the last control is accessed on the camera or connected printer. z The power saving function is disabled while a slide show plays on the camera or during a computer connection (p. 133, 149). z You can turn off the power saving function in the Set up menu (p. 50). Switching between Shooting and Playback You can quickly switch between Shooting mode and Playback mode. This is convenient when you wish to shoot again after checking or erasing an image immediately after it is shot. z Shooting Mode Playback Mode Turn the mode lever to (Playback) while pressing the release button (p. 30). z The camera switches to Playback mode. In this case, the lens does not retract. (If the mode lever is turned to (Playback) again, the lens retracts.) z Playback Mode Shooting Mode Remove the lens cap and press the shutter button halfway, or turn the mode lever to (Shooting) while pressing the release button (p. 29). 31