Canon Pro1 PowerShot Pro1 Camera User Guide - Page 29
Attaching the Lens Hood, Attaching the Filter Adapter
UPC - 013803034899
View all Canon Pro1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparing the Camera, Basic Functions Attaching the Lens Hood When shooting backlit scenes without a flash with the lens set to a wide angle, you should attach the lens hood to prevent light outside the scene from coming into the lens. Be sure to turn off the camera before you attach the lens hood. Lens Hood Attach the lens hood so that its z meets the lens' z, then turn the lens hood clockwise until the lens' z meets . z If you use the built-in flash when the lens hood is attached, a portion of the image appears to be blocked by the lens hood and appears dark. Attaching the Filter Adapter If you wish to attach a commercially available filter (58 mm diameter), attach the filter adapter in advance. Be sure to turn off the camera before you attach the filter adapter. Filter Adapter Attach the filter adapter so that its z meets the lens' z, then turn the filter adapter clockwise until the lens' z meets . z The filter adapter is exclusively for use with a filter. If you wish to attach Close-up Lens 500D (sold separately) to the camera, use Conversion Lens Adapter LA-DC58C (sold separately) (p. 177). z Attaching more than one filter at the same time may cause dark shadows on the image depending on the zoom position. 25