Canon S9000 S9000 Quick Start Guide - Page 13
Basic Printing
View all Canon S9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Basic Printing The S9000 photo printer can print on paper ranging from standard copier paper (usually 17-28 lb.) to Canon specialty media paper and envelopes. The paper thickness lever is located inside the front cover, on the printhead holder. It controls the paper feed for the type and weight of the media on which you are printing. Use the chart on the previous page to ensure that the paper thickness lever is set correctly for the type of Canon media you are using. Print side Load limit mark To load plain paper: 1. Make sure the paper thickness lever is set to the left. 2. Pinch and slide the paper guide to the left. 3. Fan the edges of the sheets to remove static cling and avoid paper jams, then tap the edges of the stack against a flat surface so the stack is aligned. 4. Insert the paper into the paper rest. 5. Slide the paper guide right to the edge of the paper until firmly in place. To load Canon specialty media: Make sure the paper thickness lever is set correctly for the media used. (See "Load Limit and Paper Thickness Lever Position" on page 5.) 1. Pinch and slide the paper guide to the left. 2. With the print side facing up, insert the media into the paper rest with the right edge aligned to the right side of the sheet feeder. Some specialty media have specific sides for printing. The print side is usually the brighter white or glossier side of the page. When using specialty media, ensure that the brighter/glossier side faces up and avoid touching the print side. Always follow the specific media instructions packaged with your media for complete details and ink drying times. 3. Slide the paper guide right to the edge of the media until firmly in place. 6