Cisco 7600 SIP 200 Hardware Installation Guide

Cisco 7600 SIP 200 - SPA Interface Processor 200 Manual

Get Cisco 7600 SIP 200 - SPA Interface Processor 200 PDF manuals and user guides
UPC - 746320961286
View all Cisco 7600 SIP 200 manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco 7600 SIP 200 manual content summary:

  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 1
    Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide October, 2010 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 2
    mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R) Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide Copyright © 2010, Cisco Systems, Inc. All rights reserved.
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 3
    Memory Installation and Removal 2-7 Cisco 7600 SIP-200 Default DIP Switch Settings 2-8 Cisco 7600 SIP-400 Overview 2-8 Cisco 7600 SIP-400 Processor 2-9 Cisco 7600 SIP-400 LEDs 2-9 Cisco 7600 SIP-400 Physical Specifications 2-9 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 4
    Compatibility 3-2 Bandwidth Oversubscription 3-2 Cisco 7600 SIP-400 Oversubscription Guidelines 3-4 2-Port and 4-Port Channelized T3 SPA Overview 3-4 2-Port and 4-Port Channelized T3 SPA LEDs 3-4 2-Port and 4-Port Channelized T3 SPA Interface Specifications 3-5 2-Port and 4-Port Channelized T3 SPA
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 5
    Interface Specifications 3-38 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA Fixed Optical Transceiver, 40-pin Connector, and Cables 3-38 4-Port and 8-Port Fast Ethernet SPA Overview 3-39 4-Port and 8-Port Fast Ethernet SPA LEDs 3-39 Cables, Connectors, and Pinouts 3-40 Cisco 7600 Series Router SIP
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 6
    CEoP SPA Optical Transeiver Modules and Cables 3-60 24-Port Channelized T1/E1 ATM CEoP SPA Overview 3-60 24-Port Channelized T1/E1 ATM CEoP SPA LEDs 3-61 24-Port Channelized T1/E1 ATM CEoP SPA Interface Specifications 3-61 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide vi
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 7
    a SIP Configuration Example 5-7 Activation of a SIP Configuration Example 5-7 Deactivation of a SPA Configuration Example 5-7 Activation of a SPA Configuration Example 5-7 SIP Installation and Removal 5-8 Contents OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 8
    Blank Filler Plates 6-6 SPA Cable-Management Brackets 6-7 Troubleshooting the Installation 7-1 Troubleshooting 7-1 Using debug Commands 7-2 Packing a SPA for Shipment 7-3 Packing a SIP for Shipment 7-4 Index IN-1 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide viii OL-5052
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 9
    This document describes the SPA interface processors (SIPs) and shared port adapters (SPAs) that are supported on the Cisco 7600 series routers. This document also describes how to install the supported SIPs and SPAs and how to troubleshoot the installation. Document Revision History Table
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 10
    , page 6 • XFP-10F-MM-SR for 10GE SPAs on the SIP400 and SIP-600 to Modular Optics Compatibility, page 6 • X2-DWDM and X2-10GB-LRM/ZR support on RSP720-10GE to Modular Optics Compatibility, page 6 • RSP720-10GE on Cisco 7600-SSC-400 to SPA Services Cards, page 2 May 2009 • Added STM1 Electrical
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 11
    cabling information for the 24-Port Channelized T1/E1 ATM CEoP SPA. Added support for XFP-10GZR-OC192LR. Added support for the 1-Port Channelized OC-3 STM1 ATM CEoP SPA and 24-Port Channelized T1/E1 ATM CEoP SPA. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide xi
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 12
    Adapter Troubleshooting the Installation Description Provides an introduction to SPA interface processors (SIPs) and shared port adapters (SPAs). Provides a SIP/SPA compatibility summary. For each supported SIP, provides a summary of SIP characteristics and a SIP overview. For each supported SPA
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 13
    Documentation As you configure your Cisco 7600 series router, you should also refer to the following companion publication for important hardware installation information: • Cisco 7600 Series Ethernet Services 20G Line Card Hardware Installation Guide An overview of the Cisco 7600 series router
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 14
    Examples of information displayed on the screen are set in Courier font. Examples of text that you must enter are set in Courier bold font. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide xiv OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 15
    Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 16
    Obtaining Documentation, Obtaining Support, and Security Guidelines Preface Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide xvi OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 17
    Compatibility, page 1-6 • Power Management, page 1-14 For software details for the specific SIPs and SPAs that are supported on the Cisco 7600 series routers, refer to the companion publication, Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide. Introduction to SIPs and SPAs
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 18
    SSC. • Cisco IOS Release 12.2(33) SRE adds support for Route Switch Processor 720 10GE to the Cisco 7600 SSC-400. Shared Port Adapters The following list describes some of the general characteristics of a SPA: • A SPA is a modular type of port adapter that inserts into a subslot of a compatible SIP
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 19
    about the introduction of support for different SIPs and SPAs, refer to the "Release History" sections in the overview chapters of the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 1-3
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 20
    OC-3c/STM-1 ATM SPA 1-Port OC-12c/STM-4 ATM SPA 1-Port OC-48c/STM-16 ATM SPA Product ID SPA-1xOC3-ATM-v2 SPA-2XOC3-ATM SPA-4XOC3-ATM SPA-3xOC3-ATM-v2 SPA-1XOC12-ATM SPA-1XOC48-ATM Cisco 7600 SIP-200 Yes SIP Type Cisco 7600 Cisco 7600 SIP-400 SIP-600 Yes No Cisco 7600 SSC-400 No No Yes No
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 21
    SPA Compatibility Table for CEoP SPAs Product ID 1-Port Channelized OC-3 STM1 ATM SPA-1CHOC3-CE-ATM CEoP SPA Cisco 7600 SIP-200 No SIP Type Cisco 7600 Cisco 7600 SIP-400 SIP-600 Yes No Cisco 7600 SSC-400 No OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 22
    No Note E3 support is not available on the 2-Port Channelized T3/E3 ATM CEoP SPA on SIP-400 of the Cisco Series Router 7600 Modular Optics Compatibility Some SPAs implement small form-factor pluggable (SFP) optical transceivers to provide network connectivity. An SFP module is a transceiver device
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 23
    Port and 4-Port OC-3c/STM-1 POS SPA 1-Port OC-12c/STM-4 POS SPA 1-Port OC-48c/STM-16 POS SPA Qualified Optics Modules (Cisco Part Numbers) • XFP-10GLR-OC192SR • XFP-10GER-OC192IR • XFP-10GZR-OC192LR • XFP-10F-MM-SR (Supported only on SIP-400 and SIP-600 from Cisco IOS release 12.2(33)SRE) • X2-DWDM
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 24
    SFP-OC12-LR2 Supported DWDM-XFP Modules Table 1-8 lists the pluggable DWDM-XFP modules supported on Cisco 7600-SIP400/600-10GE line cards. Note DWDM-XFP optics are only supported on the SIP600/SPA-1X10GE-L-V2 in SRB 3. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 1-8 OL
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 25
    Chapter 1 SIP and SPA Product Overview Modular Optics Compatibility Table 1-8 DWDM-XFP-46.92 DWDM-XFP-47.72 DWDM-XFP-48.51 Supported XFP Modules Product Description Version DWDM XFP 1530.33 nm XFP 12.2(33)SRC -14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 1-9
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 26
    Compatibility Chapter 1 SIP and SPA )SRC (100 GHz ITU grid) Supported DWDM-SFP Modules Table 1-9 lists the pluggable DWDM-SFP modules supported on Cisco 7600-400/600-1GE line cards. Table 1-9 Product ID (append Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 27
    Chapter 1 SIP and SPA Product Overview Modular Optics Compatibility OL-5052-14 Product ID (append "=" for spares) DWDM-SFP-5575= DWDM-SFP-5494= DWDM-SFP-5413 12.2(33)SRD 12.2(33)SRD 12.2(33)SRD 12.2(33)SRD 12.2(33)SRD Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 1-11
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 28
    and 1G/2G FC Cisco CWDM SFP 1610 nm; 12.2(33)SRD Gigabit Ethernet and 1G/2G FC Supported BX SFP Modules Table 1-11 lists the pluggable BX SFP modules supported on Cisco 7600-200/400/600-1GE line cards. 1-12 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 29
    -BX10-D downstream bidirectional single fiber; with DOM 1000BASE-BX10-U upstream bidirectional single fiber; with DOM Supported on SIP 400 and SIP 600 SIP 400 and SIP 600 Version 12.2(33)SRD 12.2(33)SRD OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 1-13
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 30
    SPA Power Consumption SIP Cisco 7600 SIP-200 Cisco 7600 SIP-400 Power Consumption (Maximum in Watts) 2401 2651 SPA 1-Port Channelized STM-1/OC-3 SPA 15.14 1-Port Channelized STM-4/OC-12 SPA 15.14 2-Port Channelized T3 SPA 11.24 4-Port Channelized T3 SPA 13.14 8-Port Channelized T1/E1 SPA
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 31
    Pwr-Allocated Admin Oper Slot Card-Type Watts A @42V Watts A @42V State State 3 7600-SIP-400 265.02 6.31 265.02 6.31 on on 4 7600-SIP-200 200.34 4.77 200.34 4.77 on on 5 unknown 328.44 7.82 328.44 7.82 on on OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 32
    Power Management Chapter 1 SIP and SPA Product Overview 1-16 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 33
    bandwidth supported by the SIP across all subslots-not per SPA subslot. Table 2-1 SIP Summary SIP Product Number Cisco 7600 SIP-200 7600-SIP-200 Cisco 7600 SIP-400 7600-SIP-400 Cisco 7600 SIP-600 7600-SIP-600 Cisco 7600 SSC-400 7600-SSC-400 Description 622-Mbps SPA interface processor
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 34
    a specific product number to search for the minimum supported software release needed for your hardware. Identifying Slots and Subslots for SIPs and SPAs This section describes how to specify the physical locations of a SIP and SPA on the Cisco 7600 series routers within the command-line interface
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 35
    Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 2-3 SIP and SPA Installed in a Catalyst 6509 Switch Figure 2-2 shows an example of a SIP installed in slot 6 on a Catalyst 6509 switch. The Catalyst 6509 switch has nine horizontally-oriented chassis slots, which are numbered 1
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 36
    depending on the orientation of the SIP in the router chassis slot, as shown in the "SIP, SSC, and SPA Product Overview" chapter of the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 2-4 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 37
    Processor, page 2-6 • Cisco 7600 SIP-200 LEDs, page 2-6 • Cisco 7600 SIP-200 Physical Specifications, page 2-6 • Cisco 7600 SIP-200 Memory Options, page 2-7 • Cisco 7600 SIP-200 Default DIP Switch Settings, page 2-8 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 38
    Storage temperature Specifications The SIP occupies one module slot and can be operated in Cisco 7600 series routers. 8 lb (3.64 kg) 32 to 104°F (0 to 40°C) 10 to 90 percent, noncondensing -4 to 149°F (-20 to 65°C) Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 2-6 OL-5052
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 39
    at bootup/OIR: C7600_SIP200-3-MEM_MODULE_MISMATCH: Memory modules are not identical Cisco 7600 SIP-200 Memory Installation and Removal Figure 2-5 shows the location of the DIMMs on a Cisco 7600 SIP-200. Perform the following procedure to install and remove a DIMM: To install a DIMM, slide the DIMM
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 40
    sections describe the Cisco 7600 SIP-400 (Cisco part number 7600-SIP-400): • Cisco 7600 SIP-400 Processor, page 2-9 • Cisco 7600 SIP-400 LEDs, page 2-9 • Cisco 7600 SIP-400 Physical Specifications, page 2-9 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 2-8 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 41
    temperature Specifications The SIP occupies one module slot and can be operated in Cisco 7600 series routers. 8 lb (3.64 kg) 32 to 104°F (0 to 40°C) 10 to 90 percent, noncondensing -4 to 149°F (-20 to 65°C) OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 2-9
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 42
    sections describe the Cisco 7600 SIP-600 (Cisco part number 7600-SIP-600): • Cisco 7600 SIP-600 Processor, page 2-10 • Cisco 7600 SIP-600 LEDs, page 2-10 • Cisco 7600 SIP-600 Physical Specifications, page 2-10 Cisco 7600 SIP-600 Processor The processor on a Cisco 7600 SIP-600 is described in
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 43
    Description Physical dimensions Shipping weight Operating temperature Relative humidity Storage temperature Specifications The SIP occupies one module slot and can be operated in Cisco 7600 series routers. The Cisco 7600-SIP-600 supports installation of only a single SPA in the first subslot
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 44
    7600 Series SIPs Cisco 7600 SSC-400 Overview The following sections describe the SPA services carrier (Cisco part number 7600-SSC-400): • Cisco 7600 SSC-400 Processor, page 2-12 • Cisco 7600 SSC-400 LED, page 2-12 • Cisco 7600 SSC-400 Physical Specifications, page 2-13 Cisco 7600 SSC-400 Processor
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 45
    Specifications The Cisco 7600 SSC-400 occupies one module slot and can be operated in Cisco 7600 series routers. 8 lb (3.64 kg) 32 to 104°F (0 to 40°C) 10 to 90 percent, noncondensing -4 to 149°F (-20 to 65°C) OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 46
    Cisco 7600 SSC-400 Overview Chapter 2 Overview: Cisco 7600 Series SIPs 2-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 47
    SPA Overview, page 3-54 • 2-Port Gigabit Synchronous Ethernet SPA Overview, page 3-58 • 5-Port Gigabit Ethernet SPA Overview, page 3-61 • 10-Port Gigabit Ethernet SPA Overview, page 3-67 • IPSec VPN SPA Overview, page 3-71 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 48
    155.52 Mbps 1-Port Clear Channel OC-3 ATM SPA 155.52 Mbps V2 Number of Ports 2 4 8 2 4 1 1 Total Bandwidth 89.47 Mbps 178.94 Mbps 12.35 Mbps (T1) 16.38 Mbps (E1) 311.04 Mbps 622.08 Mbps 155.52 Mbps 155.52 Mbps Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-2 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 49
    Mbps (E3) 178.94 Mbps (T3) 137.47 Mbps (E3) 400 Mbps 800 Mbps 10 Gbps 20 Gbps 2000 Mbps 2000 Mbps 5000 Mbps 10,000 Mbps 155.52 Mbps 37.06 Mbps (T1) 49.15 Mbps (E1) 89.47 Mbps (T3) 68.74 Mbps (E3) OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-3
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 50
    7600-SIP-400 supports installation of up to two 2-Port Gigabit Ethernet SPAs without any other SPAs installed in the SIP. • The Cisco 7600-SIP-400 supports installation of any combination of a OC-3, OC-12 POS, CEoP, or ATM SPAs, up to a combined ingress bandwidth of OC-48 rates. • The Cisco 7600-SIP
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 51
    T3 SPA: • 2-Port and 4-Port Channelized T3 SPA LEDs, page 3-6 • 2-Port and 4-Port Channelized T3 SPA Interface Specifications, page 3-6 • 2-Port and 4-Port Channelized T3 SPA Cables and Connectors, page 3-7 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-5
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 52
    , and SPA is being configured. 2-Port and 4-Port Channelized T3 SPA Interface Specifications The framer processes incoming and outgoing T3 frames (cbit, m13/m23, and unframe). The framer operates at T3 line rates (44.2 Mbps). Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 53
    2-Port and 4-Port Clear Channel T3/E3 SPA LEDs, page 3-8 • 2-Port and 4-Port Clear Channel T3/E3 SPA Interface Specifications, page 3-8 • 2-Port and 4-Port Clear Channel T3/E3 SPA Cables and Connectors, page 3-9 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-7
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 54
    on. SPA power is off. SPA is ready and operational. SPA power is on and good, and the SPA is being configured. 2-Port and 4-Port Clear Channel T3/E3 SPA Interface Specifications The transported to the far end. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-8 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 55
    , and Pinouts, page 3-11 8-Port Channelized T1/E1 SPA LEDs The 8-Port Channelized T1/E1 SPA has three types of LEDs. There are two LEDs for each port on the SPA, and one STATUS LED as shown in Figure 3-3. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-9
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 56
    comply with EN55022/CISPR22 Class A emissions requirements. For revisions 73-8358-05 through 73-8358-08 Shielded Twisted pair (STP) T1/E1 cables must be used to comply with FCC Class A emissions requirements. 3-10 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 57
    OC-3 SPA Cables and Connectors, page 3-13 1-Port Channelized STM-1/OC-3 SPA LEDs The 1-Port Channelized STM-1/OC-3 SPA has two types of LEDs: an A/L LED for each port and a STATUS LED, as shown in Figure 3-5. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-11
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 58
    , PPP over SONET/SDH, and RFC 1662, PPP in HDLC-like Framing. The 1-Port Channelized STM-1/OC-3 SPA also provides support for SNMP v1 agent (RFC 1155-1157), and Management Information Base (MIB) II (RFC 1213). 3-12 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 59
    SFP optical transceiver modules (for long-reach configurations) cannot be connected back-to-back without using an attenuator between the two of them. Figure 3-7 LC Type Cables / / / / / / RX TX 84929 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-13
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 60
    by software. Port is enabled by software, loopback is off. Port is enabled by software, loopback is on. SPA power is off. SPA is ready and operational. SPA power is on and good, and SPA is being configured. 3-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 61
    small form-factor pluggable (SFP) optical transceiver module installed in each port for SONET and SDH single-mode and multimode optical fiber connection (see Figure 3-9). Figure 3-9 SFP Optics Module 127158 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-15
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 62
    -1 ATM SPA: • 2-Port and 4-Port OC-3c/STM-1 ATM SPA LEDs, page 3-17 • 2-Port and 4-Port OC-3c/STM-1 ATM SPA Interface Specifications, page 3-17 • 2-Port and 4-Port OC-3c/STM-1 ATM SPA Cables and Connectors, page 3-18 3-16 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 63
    up to four 155-Mbps OC-3 network interfaces for all supported platforms. Each SPA port accepts an SFP module with a duplex LC-type receptacle that allows connection to single-mode or multimode optical fiber. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-17
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 64
    optics modules (for long-reach configurations) SPA Version 2 LEDs, page 3-19 • 1-Port Clear Channel OC-3, 3-Port Clear Channel OC-3, and 1-Port Clear Channel OC-12 ATM SPA Version 2 Interface Specifications, page 3-20 3-18 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 65
    . Port is enabled by software, and loopback is off. Port is enabled by software, and loopback is on. SPA power is off. SPA power is on and good, and SPA is being configured. SPA is ready and operational. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-19
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 66
    or to connect two OC-3-equipped routers back-to-back. Long-range SFP optical transceiver modules (for long-reach configurations) cannot be connected back-to-back without using an attenuator between the modules. 3-20 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 67
    about SPAs and their compatibility with SIPs and modular optics, see the "Carrier Card and SPA Product Overview" chapter in this guide. The following sections describe the 2-Port and 4-Port OC-3c/STM-1 POS SPA: • OC-3c/STM-1 POS SPA LEDs, page 3-21 • OC-3c/STM-1 POS SPA Interface Specifications
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 68
    SPA SFP Optical Transceiver Modules and Cables The POS SPA uses a small form-factor pluggable (SFP) optical transceiver module installed in each port for SONET and SDH single-mode and multimode optical fiber connection. 3-22 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 69
    -12/STM-4 SPA: • 1-Port Channelized OC-12/STM-4 SPA LEDs, page 3-24 • 1-Port Channelized OC-12/STM-4 SPA Interface Specifications, page 3-24 • 1-Port Channelized OC-12/STM-4 SPA Cables and Connectors, page 3-25 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-23
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 70
    ), and supports channelization from OC-12 down to DS0 line rates. Packet data is transported with a user-configured encapsulation (such as Point-to-Point Protocol [PPP]) and is mapped into the STS-12/STM-4 frame. 3-24 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 71
    or SDH STM-4) Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns. (Nominal diameter is approximately 10/125 microns.) OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-25
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 72
    SFP optical transceiver modules (for long-reach configurations) cannot be connected back-to-back without using an attenuator between the two of them. Figure 3-21 LC Type Cables / / / / / / RX TX 84929 3-26 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 73
    . Port is not enabled by software. Port is enabled by software, loopback is off. Port is enabled by software, loopback is on. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-27
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 74
    MM) SFP module-SFP-OC12-MM • Short reach (SR) SFP module-SFP-OC12-SR • Intermediate reach (IR) SFP module (15 km)-SFP-OC12-IR1 • Long reach (LR) SFP module (40 km)-SFP-OC12-LR1 • LR SFP module (80 km)-SFP-OC12-LR2 3-28 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 75
    SFP optical transceiver modules (for long-reach configurations) cannot be connected back-to-back without using an attenuator between the two of them. Figure 3-24 LC-Type Cable / / / / / / RX TX 84929 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-29
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 76
    is a valid ATM signal without any alarms. Port is enabled by software, and there is at least one alarm. SPA power is off. SPA power is on and good, and SPA is being configured. SPA is ready and operational. 3-30 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 77
    the 1-Port OC-48c/STM-16 POS SPA: • OC-3c/STM-1 POS SPA LEDs, page 3-21 • OC-3c/STM-1 POS SPA Interface Specifications, page 3-22 • OC-3c/STM-1 POS SPA SFP Optical Transceiver Modules and Cables, page 3-22 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-31
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 78
    by software. Port is enabled by software, loopback is off. Port is enabled by software, loopback is on. Port is not enabled by software. 3-32 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 79
    SPA power off. On SPA is ready and operational. On SPA power is on and good; SPA is being configured. 1-Port OC-48c/STM-16 POS SPA Interface Specifications module on the 1-Port OC-48c/STM-16 POS SPA. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-33
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 80
    -16 POS SPA Faceplate 12 PRT ACT PTH CAR PRT ACT PTH CAR 0 1 34 1 PTH (Pass Through) LED 2 PRT (Protect) LED 3 CAR (Carrier Alarm) LED SPA-2XOC48-POS/RPR 5 4 ACT (Active Loopback) LED 5 STATUS LED STATUS 138086 3-34 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 81
    by Cisco and is used in conjunction with Cisco DPT products, which utilizes a pair of counter-rotating rings in an optimum fashion to provide improved bandwidth utilization over an equivalent SONET network. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-35
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 82
    -48 IR-1: -5 to 0 dBm OC-48 LR-2: -2 to +3 dBm OC-48 SR: -18 dBm OC-48 IR-1: -18 dBm OC-48 LR-2: -28 dBm 3-36 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 83
    connect the SPAs. Figure 3-31 SPA Mate Cables 1 129198 2 1 Long length RPR mate cable for single port 2 Short length RPR mate cable for single port RPR SPAs (CBL-RPR-OC192-L) RPR SPAs (CAB-RPR-OC192-S) OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-37
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 84
    3 MATESYNC LED 4 CARRIER LED 5 ACTIVE LED 6 STATUS LED Note The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. In Cisco IOS Release 12.0(31)S, RPR/SRP mode is not supported. 129138 3-38 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 85
    SPA power off. On SPA is ready and operational. On SPA power is on and good; SPA is being configured. 1-Port OC-192c/STM-64 POS/RPR SPA Interface Specifications The 1-Port OC-192c/STM-64 POS/RPR SPA (SNMP) OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-39
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 86
    , next slot horizontal and same slot vertical. This assumes that the chassis is mounted vertically. Figure 3-34 shows the mate cables used to connect the SPAs. 3-40 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 87
    POS/RPR XFP SPA LEDs, page 3-42 • 1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications, page 3-43 • 1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules, Connectors, and Cables, page 3-43 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-41
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 88
    SRP mode is not supported. Table 3-20 describes the 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs. Table 3-20 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs LED Label Blinking SRP mode mismatch alarm is indicated. 3-42 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 89
    transceiver modules qualified for use. Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns (nominal diameter is approximately 10/125 microns) to connect your router to a network. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-43
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 90
    /RPR XFP SPA is used for resilient packet ring (RPR) connections. This feature is not supported in. OC-192 Module Connections Table 3-21 shows the OC-192 specifications for use IR-2: +5 dBm OC-192 LR-2: +5 dBm 3-44 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 91
    : Cisco 7600 Series Router Shared Port Adapters 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA Overview Mate Interface Cables The 1-Port OC-192c/STM-64 POS/RPR XFP SPA supports two mate interface configurations: • Mate between two OC-192c SPAs in the same SIP • Mate between two OC-192c SPAs in
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 92
    : Cisco 7600 Series Router Shared Port Adapters For more information about SPA bandwidth, see the "Bandwidth Oversubscription" section in this chapter. For more information about SPAs and their compatibility with SIPs and modular optics, see the "SIP and SPA Product Overview" chapter in this guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 93
    Only Very Short Reach (VSR) optics are supported. The 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA uses multimode MTP-type connectors: • Multimode-9.95 Gbps, OC-192 optical fiber (SONET STS-192c or SDH STM-64c) OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-47
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 94
    , next slot horizontal and same slot vertical. This assumes that the chassis is mounted vertically. Figure 3-34 shows the mate cables used to connect the SPAs. Figure 3-40 SPA Mate Cables 1 129198 2 3-48 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 95
    this case, port number refers to the numbered LEDs on the 8-Port FastEthernet SPA (0, 1, 2, 3, 4, 5, 6 or 7). Each LED number on the 8-Port FastEthernet SPA references a port on the SPA. SPA-8X1FE-TX-V2 138712 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-49
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 96
    Cable Pinout, RJ-45 Connection to a Hub or Repeater Hub or LAN switch 3 TxD+ 6 TxD- Ethernet port 3 RxD+ 6 RxD- H7101 1 RxD+ 2 RxD- 1 TxD+ 2 TxD- 3-50 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 97
    45. Figure 3-45 1-Port 10-Gigabit Ethernet SPA Faceplate ACTIVE/LINK 1 1 Active/Link LED 2 STATUS LED The 1-Port 10-Gigabit Ethernet SPA LEDs are described in Table 3-25. STATUS SPA-1X10GE-L-V2 2 122151 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-51
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 98
    +85°C (-40°F to +185°F). The maximum power consumption per Cisco XFP module is 3.5W. See the label on the XFP for technology type and model. XFP dimensions are: • Height 12.5 mm • Width 18.35 mm • Length 71.1mm 3-52 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 99
    damage the port's optics. 3. Links longer than 30 km are considered engineered links. XFP Optical Transmit and Receive Specifications Table 3-27 provides XFP optical transmit and receive specifications. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-53
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 100
    2-Port Gigabit Ethernet SPA Overview The following sections describe the 2-Port Gigabit Ethernet SPA: • 2-Port Gigabit Ethernet SPA LEDs, page 3-55 • SFP Module Cabling and Connection Equipment, page 3-57 3-54 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 101
    supported in this document. An SFP check is run every time an SFP module is inserted into the 2-Port Gigabit Ethernet SPA and only SFP modules that pass this check will be usable by the 2-Port Gigabit Ethernet SPA. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 102
    C SFP-GE-Z: -40 to 85 degrees C SFP-GE-T: -40 to 85 degrees C SFP-GE-S: 3.1 to 3.5 V SFP-GE-L: 3.1 to 3.5 V SFP-GE-Z: 3.1 to 3.5 V SFP-GE-T: 3.1 to 3.5 V 3-56 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 103
    manually configure the remote port for full-duplex. SFP Module Cabling and Connection Equipment Table 3-32 provides cabling specifications for the SFP modules that can be installed on the 2-Port Gigabit Ethernet SPA. Note that all SFP ports have LC-type connectors. OL-5052-14 Cisco 7600 Series
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 104
    • 2-Port Gigabit Synchronous Ethernet SPA LEDs, page 3-59 • 2-Port Gigabit Synchronous Ethernet SPA Interface Specifications, page 3-59 • 2-Port Gigabit Synchronous Ethernet SPA Cables and Connectors, page 3-61 3-58 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 105
    synchronization. IEEE1588v2 defines a Precision Time Protocol (PTP),which distributes accurate timing information (both clock frequency and time of day) over packet networks. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-59
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 106
    2) for platform timing support and performance. • IETF TICTOC telecom profile support for performance. • ITU-T G.8261, G.8262, G.823, G.824, G.825, O.171, and O.172 for clock jitter and wander specifications. 3-60 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 107
    , and Pinouts, page 3-62 • SFP-GE-S Modules, page 3-64 • SFP-GE-L Modules, page 3-64 • SFP-GE-Z Modules, page 3-64 • SFP-GE-T Modules, page 3-65 • SFP Module Cabling and Connection Equipment, page 3-65 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-61
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 108
    form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit Ethernet optical slots on the 5-Port Gigabit Ethernet SPA, linking the port with a 1000BASE-X fiber-optic network. 3-62 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 109
    interface. Table 3-36 and Table 3-37 provide SFP information and specifications. Table 3-36 SFP Module Options SFP Module Product Number SFP-GE-S SFP-GE-L SFP Module Short C SFP-GE-T: 0 to 70 degrees C OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-63
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 110
    -optic cable plant and the receiving port on the 1000BASE-ZX module at each end of the link whenever the fiber-optic cable span is equal to or greater than 15.5 miles (25 km) but less than 31 miles (50 km). 3-64 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 111
    link distance (tens of meters). The result could be an elevated bit error rate (BER). 3. Dispersion-shifted single-mode fiber-optic cable. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-65
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 112
    5-Port Gigabit Ethernet SPA Overview Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters Note The 1000BASE-ZX SFP modules provide an optical power budget of performed with a 1550-nm light source. 3-66 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 113
    Port is not enabled. The port is enabled and the link is up. The port is enabled and the link is down. SPA power is off. SPA power is on and good, and SPA is being configured. SPA is ready and operational. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-67
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 114
    Category 5 copper wire Table 3-41 SFP Module Specifications Specification Connectors Wavelength Description LC-type connector SFP-GE-S: 830-860 nm SFP-GE-L: 1270-1360 nm SFP-GE-Z: 1540-1570 nm SFP-GE-T: N/A 3-68 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 115
    Medium Dependent (PMD) component for Gigabit Ethernet interfaces found on various switch and router products. It operates at a signaling rate of 1250 Mbaud, transmitting and receiving 8B/10B encoded data. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-69
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 116
    (550 m) 1804 ft (550 m) 1804 ft (550 m) 1804 ft (550 m) 6.2 miles (10 km) 49.7 miles (80 km) 62.1 miles (100 km) 328 ft. (100 m) 3-70 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 117
    -ZX SFP modules provide an SERVICES SPA 1 STATUS LED The IPSec VPN SPA LED is described in Table 3-43. Table 3-43 IPSec VPN SPA LED LED Label STATUS Color Off State Off Meaning SPA power is off. SPA-IPSEC-2G OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 118
    Meaning SPA is on and good, and the SPA is being configured. SPA is ready and operational. Caution The Cisco 12000 SIP-401, Cisco 12000 SIP-501, and Cisco 12000 SIP-601 do not support the IPSec VPN SPA (SPA-IPSEC-2G). Installing a IPSec VPN SPA in these carrier cards could damage the guide rails
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 119
    Channelized T1/E1 ATM CEoP SPA: • 24-Port Channelized T1/E1 ATM CEoP SPA LEDs • 24-Port Channelized T1/E1 ATM CEoP SPA Interface Specifications • 24-Port Channelized T1/E1 ATM CEoP SPA Cables and Connectors OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-73
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 120
    cable is installed. 24-Port Channelized T1/E1 ATM CEoP SPA Cables and Connectors The 24-Port Channelized T1/E1 ATM CEoP SPA requires a Cisco cable (part number CABLE-24T1E1J1), which is shown in the following figure. 3-74 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 121
    250107 SPA Cable Pinouts The following table shows the cable pinouts for the cable (part number CABLE-24T1E1J1) that is installed between the 24-Port Channelized T1/E1 ATM CEoP SPA and the rear of the patch panel. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 122
    Port Channelized T1/E1 ATM CEoP SPA Overview Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters Table 3-46 24-Port Channelized T1/E1 ATM CEoP SPA Cable Connector 9 34 Not connected 10 35 3-76 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 123
    Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters 24-Port Channelized T1/E1 ATM CEoP SPA Overview Table 3-46 24-Port Channelized T1/E1 ATM CEoP SPA Cable Connector Pinouts (continued) 20 45 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-77
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 124
    both CEoP SPAs are connected to their patch panels in the same manner (TX to Transmit and RX to Receive, or TX to Receive and RX to Transmit), use a T1 cross-over cable to connect the patch panels to each other. 3-78 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 125
    for each port on the SPA, and a single STATUS LED for the SPA. Figure 3-57 2-Port Channelized T3/E3 ATM CEoP SPA Faceplate 4 3 0 C/A 1 C/A A/L A/L TX RX TX RX 12 STATUS SPA-2CHT3-CE-ATM 5 250287 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-79
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 126
    by software. Port is enabled by software, loopback is off. Port is enabled by software, loopback is on. SPA power is off. SPA power is on and good, and SPA is being configured. SPA is ready and operational. 3-80 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 127
    contact, and the outer shield is ground for the 75-ohm RG-59 coaxial cable you attach to the RX Siemax connector. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-81
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 128
    2-Port Channelized T3/E3 ATM CEoP SPA Overview Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters 3-82 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 129
    You need the following tools and parts to install SIPs and SPAs. If you need additional equipment, contact a service representative for ordering information. • Shared port adapter interface processor (SIP) • Shared port adapter (SPA) • SPA Services Card (SSC) • Number 1 Phillips and a 3/16-inch flat
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 130
    card hardware: • The module needs to be properly aligned and that the module MUST be gently pushed into the chassis. • You must take care to insert the line card through appropriate guides . SÄILYTÄ NÄMÄ OHJEET Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-2 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 131
    é traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Warnung WICHTIGE este dispositivo. GUARDE ESTAS INSTRUÇÕES OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-3
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 132
    Safety Guidelines Chapter 4 Preparing to Install a SIP or a Shared Port Adapter ¡Advertencia! INSTRUCCIONES IMPORTANTES DE översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-4 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 133
    Chapter 4 Preparing to Install a SIP or a Shared Port Adapter Safety Guidelines OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-5
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 134
    Safety Guidelines Chapter 4 Preparing to Install a SIP or a Shared Port Adapter Electrical Equipment Guidelines Follow these basic guidelines when working with any electrical equipment: Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-6 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 135
    or in a static shielding container. If you plan to return the component to the factory, immediately place it in a static shielding container. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-7
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 136
    LED warning label, as shown in Figure 4-1. These warnings apply to SPAs and SFP modules that transmit signals via an optical carrier signal. Figure 4-1 Class 1 direttamente o attraverso strumenti ottici. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-8 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 137
    Chapter 4 Preparing to Install a SIP or a Shared Port Adapter Laser/LED Safety Advarsel Det kan forekomme usynlig laserstråling fra eller stik. Stir ikke ind i stråler eller direkte med optiske instrumenter. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-9
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 138
    from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051 Warning Class 1 LED product. Statement 1027 4-10 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 139
    interference (EMI) emissions requirements and to allow proper airflow across the installed modules. If you plan to install a SIP in a slot that is not in use, you must first remove the blank filler plate. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 5-1
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 140
    circuit board Metal carrier Chapter 5 Installing and Removing a SIP 70006 GND Online Insertion and Removal The Cisco 7600 series router supports online insertion and removal (OIR) of the SPA interface processor (SIP) or SPA services card (SSC), in addition to each of the shared port adapters
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 141
    SIP, refer to the Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide. Deactivating a SIP or SSC To deactivate a SIP or SSC and its installed SPAs prior to removal of the SIP, use the following command in global configuration mode: Command Router(config)# no power enable module
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 142
    always be fully installed with either functional SPAs or blank filler plates. The interface configuration is retained (recalled) if a SIP or SPA is removed and then replaced with one of the same type. This is not the case if you replace a Cisco 7600 SIP-200 with a Cisco 7600 SIP-400 or vice versa
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 143
    shutdown global configuration command and need to reactivate it without performing an OIR, you need to use the no hw-module subslot shutdown global configuration command to reactivate the SPA and its interfaces. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 5-5
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 144
    SPAs: • Deactivation of a SIP Configuration Example, page 5-7 • Activation of a SIP Configuration Example, page 5-7 • Deactivation of a SPA Configuration Example, page 5-7 • Activation of a SPA Configuration Example, page 5-7 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 145
    of the SIP. The following example activates the SPA that is installed in slot 2 of the router and all of its interfaces. Router# configure terminal Router(config)# no hw-module subslot 2/0 shutdown Router# OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 5-7
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 146
    pull the blank filler plate completely out of the module slot. With the SIP halfway out of the module slot, disconnect all cables from the SPA. After disconnecting the cables, pull the SIP out of the module slot. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 5-8 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 147
    Installing and Removing a SIP SIP Installation and Removal A Figure 5-2 illustrates how to install and remove a SIP in a Cisco 7600 series router. Figure 5-2 7600-SIP-600 STATUS SPA INTERFACE PROCESSOR SIP Installation Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 5-9
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 148
    SIP Installation and Removal Chapter 5 Installing and Removing a SIP 5-10 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 149
    interference (EMI) emissions requirements and to allow proper airflow across the installed modules. If you plan to install a SPA in a subslot that is not in use, you must first remove the SPA blank filler plate. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 6-1
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 150
    install and remove a SPA in a SIP. Figure 6-2 SPA Installation and Removal 1 129105 7600-SIP-400 0 STATUS SPPRAOICNETSESROFARCE 2 TX WRPAAPSSTHMRUATESYNC 0 CARRIER ACTIVE RX 2 STATUS VPA-OC192 POS-SR 1 SIP 2 SPA Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 151
    the cables from the SPA when removing the SIP). Online Insertion and Removal Cisco 7600 series router SIPs and SPAs support online insertion and removal (OIR). SPAs can be inserted or removed independently from the SIP. OIR of a SIP with installed SPAs is also supported. For more information about
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 152
    has completed its initialization. The SPA STATUS LEDs will illuminate amber, turning to green when the SPAs become active. • When the SIP and SPA STATUS LEDs are green, all associated interfaces are configurable. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 6-4 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 153
    the Installation Refer to the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide for configuration instructions. • If a SIP or SPA is replaced with a module of the same type (as in an OIR or hardware swap), the previous configuration will be reinstated when the SIP or SPA
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 154
    The router's running configuration and interfaces available in the system. The operational status of all SPAs in the system. SPA type in that slot, number of ports, hardware revision, part number, and EEPROM contents. FPD version information of SPAs in the system. Cisco IOS software version, names
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 155
    7600-MSC-600 0 3 STATUS MODULAR SERVICES CARD 2 C/A 0 A/L C/A 0 A/L C/A 0 A/L C/A 0 A/L RESET ACTIVE TX RX CARRAILEARRM RX TX PORT 1 ACTIVE TX RX CARRAILEARRM RX TX PORT 2 STATUS SPA installed. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 6-7
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 156
    SPA Cable-Management Brackets Chapter 6 Installing and Removing a Shared Port Adapter Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 6-8 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 157
    how to troubleshoot the installation of SIPs and SPAs on the Cisco 7600 series routers. This chapter contains the following sections: • Troubleshooting, page 7-1 • Troubleshooting Line Card Power Issues, page 7-3 • Miscellaneous Line Card Issues, page 7-3 • Troubleshooting Line Card States, page
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 158
    of the specific SPA installation and configuration guide, or use the Cisco IOS software configuration documentation listed in the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section on page xv. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 7-2 OL
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 159
    Dual fabric channel line cards such as (ES20 and ES+ cards) can be inserted only in 9 to13 slots of 7613 chassis. Miscellaneous Line Card Issues Table 7-2 provides solutions for troubleshooting line card issues. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 7-3
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 160
    following message indicates that the module software cannot read the module hardware version. This condition indicates a hardware error. 00:02:51: %CWPA-2-BAD_HWVERS: Unable to determine board hardware version Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 7-4 OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 161
    Troubleshooting the Installation Problem SCP Keepalive Failure Troubleshooting LC comes back online, the SCP keepalives are resumed. • A line card might be unable to respond to the scp keepalives under situations of extreme Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 7-5
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 162
    line card should then be upgraded to the latest version. If a bay crashes, collect the stack trace to identify problem. Troubleshooting Line Card States Table 7-3 provides solutions for troubleshooting line card issues. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 7-6 OL
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 163
    hw-module subslot command, see the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide. Caution Because debugging output is assigned high priority in the CPU process, it can render the system unusable. For this reason, use debug commands only to troubleshoot specific problems
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 164
    -step instructions for packing a SIP for shipment. Before beginning this procedure, you should have the following original Cisco Systems packaging materials: • Static shielding bag • Smaller inner carton • Larger exterior carton Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 165
    SIP into the two foam packing cushions (they only fit one way). Place the sealed smaller inner carton and packing cushions into the larger exterior carton, and seal the larger exterior carton with tape for shipment. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 166
    Packing a SIP for Shipment Chapter 7 Troubleshooting the Installation 7-10 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 167
    for SPAs 5-6 B blank filler plate for empty subslots in an SSC 1-2 for empty subslots in a SIP 1-1 single-height size 1-3 C Cable management brackets 6-7 cables LC-type (figure) 3-34, 3-44 LC-type (figure) 3-29 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide IN
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 168
    1-xv Cisco 7600 SIP-200 DIP Switch Settings 2-8 faceplate (figure) 2-5 Memory Installation and Removal 2-7 Memory Options 2-7 SPA compatibility (table) 1-4, 1-5 subslot numbering 2-5 Cisco 7600 SIP-400 faceplate (figure) 2-9 SPA compatibility (table) 1-4, 1-5 Cisco 7600 SIP-600 SPA compatibility
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 169
    SPA bandwidth 3-45 cables 3-47 connectors 3-47 faceplate (figure) 3-46 interface specifications 3-47 LEDs 3-46 optical transceiver modules 3-47 OC-192c/STM-64 POS/RPR XFP SPA 40-pin mate connector 3-34, 3-44 bandwidth 3-39 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide IN-3
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 170
    command 5-6 show idprom module command 2-4, 2-5 show ip interface command 5-6 show module command 2-4, 5-3 show sip-disk command 2-4 simplex MTP connector (figure) 3-48 SIP (SPA interface processor) activation (example) 5-7 blank filler plates 1-1 chassis slot installation (figure) 2-3 deactivating
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 171
    SPA interface processors (SIPs) 2-1 SSC (SPA services card) blank filler plates 1-2 definition 1-2 general characteristics 1-2 subslots description 1-1 numbering 2-4 specifying location in CLI 2-4 supervisor engines supported by SIPs 2-2 T tips, usage in text 1-xv Troubleshooting the installation
  • Cisco 7600 SIP 200 | Hardware Installation Guide - Page 172
    Index IN-6 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco 7600 Series Router SIP, SSC, and
SPA Hardware Installation Guide
October, 2010
OL-5052-14