Cisco 7600 SIP 200 Hardware Installation Guide - Page 82

-Port and 4-Port OC-48c/STM-16 POS SPA Cables, Optical Transceiver Modules, and Connectors

Page 82 highlights

2-Port and 4-Port OC-48c/STM-16 POS SPA Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters 2-Port and 4-Port OC-48c/STM-16 POS SPA Cables, Optical Transceiver Modules, and Connectors Use single-mode optical fiber cable (for intermediate-reach configurations) to connect your router to a network or to connect two OC-48-equipped routers back to back. The 2-Port and 4-Port OC-48c/STM-16 POS SPA supports the following types of optical transceiver modules: • Single-mode short-reach (SR) SFP module-SFP-OC48-SR OC48/STM16c • Single-mode intermediate-reach (IR) SFP module-SFP-OC48-IR1 OC48/STM16c • Single-mode long-reach (LR) SFP module-SFP-OC48-LR2 OC48/STM16c Each port on the 2-Port and 4-Port OC-48c/STM-16 POS SPA has one duplex LC-type receptacle. For single-mode optical fiber connections, you can use either a duplex LC-type cable (see Figure 3-30) or two simplex LC-type cables, one for transmit (TX) and one for receive (RX). Figure 3-30 LC-Type Cable / / / / / / 84929 RX TX OC-48 Module Connections Table 3-18 shows the OC-48 specifications for use with the 2-Port and 4-Port OC-48c/STM-16 POS SPA. Table 3-18 OC-48 Specifications Specification Wavelength Cabling distance (maximum) Operating case temperature range TX power Receiver sensitivity (maximum) Description OC-48 SR: 1266 nm to 1360 nm OC-48 IR-1: 1260 nm to 1360 nm OC-48 LR-2: 1500 nm to 1580 nm OC-48 SR: 2 km (1.2 miles) OC-48 IR-1: 15 km (9.3 miles) OC-48 LR-2: 80 km (49.7 miles) OC-48 SR: 23 to 158 degrees F (-5 to 70 degrees C) OC-48 IR-1: 23 to 158 degrees F (-5 to 70 degrees C) OC-48 LR-2: 23 to 158 degrees F (-5 to 70 degrees C) OC-48 SR: -10 to -3 dBm OC-48 IR-1: -5 to 0 dBm OC-48 LR-2: -2 to +3 dBm OC-48 SR: -18 dBm OC-48 IR-1: -18 dBm OC-48 LR-2: -28 dBm 3-36 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172

3-36
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-14
Chapter 3
Overview: Cisco 7600 Series Router Shared Port Adapters
2-Port and 4-Port OC-48c/STM-16 POS SPA
2-Port and 4-Port OC-48c/STM-16 POS SPA Cables, Optical Transceiver
Modules, and Connectors
Use single-mode optical fiber cable (for intermediate-reach configurations) to connect your router to a
network or to connect two OC-48-equipped routers back to back.
The 2-Port and 4-Port OC-48c/STM-16 POS SPA supports the following types of optical transceiver
modules:
Single-mode short-reach (SR) SFP module—SFP-OC48-SR OC48/STM16c
Single-mode intermediate-reach (IR) SFP module—SFP-OC48-IR1 OC48/STM16c
Single-mode long-reach (LR) SFP module—SFP-OC48-LR2 OC48/STM16c
Each port on the 2-Port and 4-Port OC-48c/STM-16 POS SPA has one duplex LC-type receptacle. For
single-mode optical fiber connections, you can use either a duplex LC-type cable (see
Figure 3-30
) or
two simplex LC-type cables, one for transmit (TX) and one for receive (RX).
Figure 3-30
LC-Type Cable
OC-48 Module Connections
Table 3-18
shows the OC-48 specifications for use with the 2-Port and 4-Port OC-48c/STM-16 POS
SPA.
/ /
/ /
/ /
TX
RX
84929
Table 3-18
OC-48 Specifications
Specification
Description
Wavelength
OC-48 SR: 1266 nm to 1360 nm
OC-48 IR-1: 1260 nm to 1360 nm
OC-48 LR-2: 1500 nm to 1580 nm
Cabling distance (maximum)
OC-48 SR: 2 km (1.2 miles)
OC-48 IR-1: 15 km (9.3 miles)
OC-48 LR-2: 80 km (49.7 miles)
Operating case temperature range
OC-48 SR: 23 to 158 degrees F (–5 to 70 degrees C)
OC-48 IR-1: 23 to 158 degrees F (–5 to 70 degrees C)
OC-48 LR-2: 23 to 158 degrees F (–5 to 70 degrees C)
TX power
OC-48 SR: –10 to –3 dBm
OC-48 IR-1: –5 to 0 dBm
OC-48 LR-2: –2 to +3 dBm
Receiver sensitivity (maximum)
OC-48 SR: –18 dBm
OC-48 IR-1: –18 dBm
OC-48 LR-2: –28 dBm