Cisco 7600 SIP 200 Hardware Installation Guide - Page 67

-Port and 4-Port OC-3c/STM-1 POS SPA Overview, OC-3c/STM-1 POS SPA LEDs

Page 67 highlights

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters 2-Port and 4-Port OC-3c/STM-1 POS SPA Overview Figure 3-15 Duplex Patch Cable with LC-Type Connectors / / / / / / RX TX 84929 2-Port and 4-Port OC-3c/STM-1 POS SPA Overview The 2-Port and 4-Port OC-3c/STM-1 POS SPAs are single-height SPAs that install into one SIP subslot. The OC-3c/STM-1 POS SPAs with small form-factor pluggable (SFP) optical transceiver modules provide SONET and SDH network connectivity with a per-port bandwidth of 155.52 Mbps. For more information about SPA bandwidth, see the "Bandwidth Oversubscription" topic in this chapter. For more information about SPAs and their compatibility with SIPs and modular optics, see the "Carrier Card and SPA Product Overview" chapter in this guide. The following sections describe the 2-Port and 4-Port OC-3c/STM-1 POS SPA: • OC-3c/STM-1 POS SPA LEDs, page 3-21 • OC-3c/STM-1 POS SPA Interface Specifications, page 3-22 • OC-3c/STM-1 POS SPA SFP Optical Transceiver Modules and Cables, page 3-22 OC-3c/STM-1 POS SPA LEDs The 2-Port and 4-Port OC-3c/STM-1 POS SPAs have three types of LEDs. There are two LEDs for each port on the SPA, and one Status LED. Figure 3-16 shows an example of these LEDs on a 4-Port OC-3c/STM-1 POS SPA. Figure 3-16 4-Port OC-3c/STM-1 POS SPA Faceplate 1 C/A A/L 0 C/A A/L 1 C/A A/L 2 C/A A/L 3 2 3 1 C/A (Carrier/Alarm) LED 2 A/L (Active Loopback) LED 3 STATUS LED STATUS 122938 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172

3-21
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-14
Chapter 3
Overview: Cisco 7600 Series Router Shared Port Adapters
2-Port and 4-Port OC-3c/STM-1 POS SPA Overview
Figure 3-15
Duplex Patch Cable with LC-Type Connectors
2-Port and 4-Port OC-3c/STM-1 POS SPA Overview
The 2-Port and 4-Port OC-3c/STM-1 POS SPAs are single-height SPAs that install into one SIP subslot.
The OC-3c/STM-1 POS SPAs with small form-factor pluggable (SFP) optical transceiver modules
provide SONET and SDH network connectivity with a per-port bandwidth of 155.52 Mbps. For more
information about SPA bandwidth, see the
“Bandwidth Oversubscription”
topic in this chapter. For more
information about SPAs and their compatibility with SIPs and modular optics, see the
“Carrier Card and
SPA Product Overview”
chapter in this guide.
The following sections describe the 2-Port and 4-Port OC-3c/STM-1 POS SPA:
OC-3c/STM-1 POS SPA LEDs, page 3-21
OC-3c/STM-1 POS SPA Interface Specifications, page 3-22
OC-3c/STM-1 POS SPA SFP Optical Transceiver Modules and Cables, page 3-22
OC-3c/STM-1 POS SPA LEDs
The 2-Port and 4-Port OC-3c/STM-1 POS SPAs have three types of LEDs. There are two LEDs for each
port on the SPA, and one Status LED.
Figure 3-16
shows an example of these LEDs on a 4-Port
OC-3c/STM-1 POS SPA.
Figure 3-16
4-Port OC-3c/STM-1 POS SPA Faceplate
/ /
/ /
/ /
TX
RX
84929
1
C/A (Carrier/Alarm) LED
3
STATUS LED
2
A/L (Active Loopback) LED
STATUS
0
1
2
3
A/L
C/A
A/L
C/A
A/L
C/A
A/L
C/A
122938
1
2
3