Cisco 7600 SIP 200 Hardware Installation Guide - Page 125
-Port Channelized T1/E1 ATM CEoP SPA Patch Panel
![]() |
UPC - 746320961286
View all Cisco 7600 SIP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters 2-Port Channelized T3/E3 ATM CEoP SPA Overview • If both CEoP SPAs are connected to their patch panels in a different configuration (TX to Transmit and RX to Receive on one SPA, and TX to Receive and RX to Transmit on the other SPA), use a T1 straight-through cable (standard RJ-45 patch cable) between the patch panels. 24-Port Channelized T1/E1 ATM CEoP SPA Patch Panel The recommended patch panel is part number DCC2484/25T1S from SMP Data Communications (http://www.smpdata.com). To order the patch panel, contact the Sales and Marketing Support staff at SMP Data Communications: • 800-880-7674 (toll free in the U.S.A.) • 828-298-2260 (outside the U.S.A.) • [email protected] (email) For product support for the patch panel, contact Cisco Engineering Support at SMP Data Communications: • 800-880-7674 (toll free in the U.S.A.) • 828-298-2260 (outside the U.S.A.) • [email protected] (email) 2-Port Channelized T3/E3 ATM CEoP SPA Overview The following sections describe the 2-Port Channelized T3/E3 ATM CEoP SPA: • 2-Port Channelized T3/E3 ATM CEoP SPA LEDs • 2-Port Channelized T3/E3 ATM CEoP SPA Interface Specifications • 2-Port Channelized T3/E3 ATM CEoP SPA Cables and Connectors 2-Port Channelized T3/E3 ATM CEoP SPA LEDs The 2-Port Channelized T3/E3 ATM CEoP SPA has three types of LEDs, as shown in the following figure. There are two LEDs for each port on the SPA, and a single STATUS LED for the SPA. Figure 3-57 2-Port Channelized T3/E3 ATM CEoP SPA Faceplate 4 3 0 C/A 1 C/A A/L A/L TX RX TX RX 12 STATUS SPA-2CHT3-CE-ATM 5 250287 OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-79
![](/manual_guide/products/cisco-7600-sip-200-hardware-installation-guide-73e26b3/125.png)