Cisco 7600 SIP 200 Hardware Installation Guide - Page 88
-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs
UPC - 746320961286
View all Cisco 7600 SIP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
0 STATUS 129432 1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs The 1-Port OC-192c/STM-64 POS/RPR XFP SPA has six LEDs, as shown in Figure 3-35. Figure 3-35 1-Port OC-192c/STM-64 POS/RPR XFP SPA Faceplate 13 4 2 5 WPARSASPMT HART EUS Y N C C A R R I EARC T I V E SPA-0C192POS-XFP 6 1 WRAP LED 2 PASSTHRU LED 3 MATESYNC LED 4 CARRIER LED 5 ACTIVE LED 6 STATUS LED Note The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. As of, RPR/SRP mode is not supported. Table 3-20 describes the 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs. Table 3-20 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs LED Label WRAP PASSTHRU MATESYNC CARRIER Color Off Green Amber Off Amber Off Green Off Green Amber State Meaning Off Port is not in wrap mode. On Port is in wrap mode somewhere on the ring. On Port is in wrap mode locally. Off Port is not in pass-thru mode. On Port is in pass-thru mode. Off Mate port is not synchronized. On Mate port is synchronized. Off Port is not enabled by software. On Port is enabled by software, and there is a valid SONET signal without alarms. On Port is enabled by software, and there is at least one alarm (LOS, LOF, RDI, and so on). Blinking SRP mode mismatch alarm is indicated. 3-42 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14