Cisco 7600 SIP 200 Hardware Installation Guide - Page 154
Using show Commands to Display SPA Information, SPA Blank Filler Plates - boot ios
UPC - 746320961286
View all Cisco 7600 SIP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
SPA Blank Filler Plates Chapter 6 Installing and Removing a Shared Port Adapter Using show Commands to Display SPA Information Table 6-1 describes the show commands you can use to display SPA information. Table 6-1 show Commands to Display SPA Information Command show running-config show hw-module subslot all oir show diag show hw-module subslot all fpd show version Type of Information Provided The router's running configuration and interfaces available in the system. The operational status of all SPAs in the system. SPA type in that slot, number of ports, hardware revision, part number, and EEPROM contents. FPD version information of SPAs in the system. Cisco IOS software version, names and sources of configuration files, and boot images. SPA Blank Filler Plates SPA blank filler plates are available to fill an unused SPA subslot. When a SPA subslot is not in use, a SPA blank filler plate must be installed in the empty subslot to allow the router or switch to conform to electromagnetic interference (EMI) emissions requirements and to allow proper airflow across the SPAs. If you plan to install a new SPA in a subslot that is not in use, you must first remove the SPA blank filler plate. Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 6-6 OL-5052-14