Cisco 7600 SIP 200 Hardware Installation Guide - Page 50
Cisco 7600 SIP-400 Oversubscription Guidelines, SPA PID, Total SPI ports consumed
UPC - 746320961286
View all Cisco 7600 SIP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Bandwidth Oversubscription Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters Cisco 7600 SIP-400 Oversubscription Guidelines As of Cisco IOS Release 12.2(18)SXF, when using the Cisco 7600 SIP-400 with the 2-Port Gigabit Ethernet SPA or the 1-Port OC-48c/STM-16 ATM SPA, consider the following oversubscription guidelines: • The Cisco 7600-SIP-400 only supports installation of one 1-Port OC-48c/STM-16 ATM SPA without any other SPAs installed in the SIP. • The Cisco 7600-SIP-400 supports installation of up to two 2-Port Gigabit Ethernet SPAs without any other SPAs installed in the SIP. • The Cisco 7600-SIP-400 supports installation of any combination of a OC-3, OC-12 POS, CEoP, or ATM SPAs, up to a combined ingress bandwidth of OC-48 rates. • The Cisco 7600-SIP-400 supports installation of any combination of OC-3, OC-12 POS, CEoP, or ATM SPAs up to a combined ingress bandwidth of OC-24 rates, when installed with a single 2-Port Gigabit Ethernet SPA. • The Cisco 7600-SIP-400 supports installation of a single 1-Port 10-Gigabit Ethernet SPA without any other SPAs installed in the 7600-SIP-400. Note A 1-Port 10-Gigabit Ethernet SPA on a 7600-SIP-400 provides 4 Gbps of bandwidth. • A maximum of 32 total ingress SPI-4 ports are supported on the SIP-400. Ethernet SPAs use 2 SPI Port per interface. If a SPA which causes the total required SPI-4 ports on SIP-400 to exceed 32, that SPA will not be permitted to power up. For example, if you insert the SPA-5x1GE into the SIP-400, where SPAs already inserted have consumed at least 23 SPI ports, the following error message will be posted on the console: SPI-4 port limit exceeded, SPA-5X1GE in subslot 3 has been powered down. • The Cisco 7600 supports four 4-port FE SPAs or two 8-port FE SPA in SIP-400 in one shot The following table lists the different SPA types and the total SPI ports consumed by them on a SIP-400: SPA PID SPA-1XOC12-POS SPA-2XOC3-POS SPA-4XOC3-POS SPA-1XOC48-POS SPA-2XGE SPA-2XGE-V2 SPA-5XGE-V2 SPA-1X10GE-V2 SPA-4XFE-TX-V2 SPA-8XFE-TX-V2 SPA-2XOC3-ATM Total SPI ports consumed POS SPAs 1 2 4 1 Ethernet SPAs 4 4 10 2 8 16 ATM SPAs 2 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-4 OL-5052-14