Cisco 7600 SIP 200 Hardware Installation Guide - Page 119

-Port Channelized OC-3 STM1 ATM CEoP SPA Interface Specifications

Page 119 highlights

Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters 24-Port Channelized T1/E1 ATM CEoP SPA Overview The 1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs are described in the following table. Table 3-44 1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs LED Label C/A A/L STATUS Color Off Green Amber Off Green Amber Off Amber Green State Off On On Off On On Off On On Meaning Port is not enabled by software. Port is enabled by software. Port is enabled by software, and there is at least one alarm. Port is not enabled by software. Port is enabled by software, loopback is off. Port is enabled by software, loopback is on. SPA power is off. SPA power is on and good, and SPA is being configured. SPA is ready and operational. 1-Port Channelized OC-3 STM1 ATM CEoP SPA Interface Specifications The physical layer interface for the 1-Port Channelized OC-3 STM1 ATM CEoP SPA is Optical Carrier-3 (OC-3). The 1-Port Channelized OC-3 STM1 ATM CEoP SPA provides one 155.52-Mbps OC-3 network interface for all supported platforms. The single SPA port accepts an SFP module with a duplex LC-type receptacle that allows connection to optical fiber. 1-Port Channelized OC-3 STM1 ATM CEoP SPA Optical Transeiver Modules and Cables Cisco Systems qualifies the optics that are approved for use with its SPAs. The 1-Port Channelized OC-3 STM1 ATM CEoP SPA supports the following types of optical transceiver modules: • Multimode (MM) SFP module-SFP-OC3-MM • Short Reach (SR) SFP module-SFP-OC3-SR • Intermediate Reach (IR) SFP module (15 km)-SFP-OC3-IR1 • Long Reach (LR) SFP module (40 km)-SFP-OC3-LR1 • Long Reach 2 (LR2) SFP module (80 km)-SFP-OC3-LR2 24-Port Channelized T1/E1 ATM CEoP SPA Overview The following sections describe the 24-Port Channelized T1/E1 ATM CEoP SPA: • 24-Port Channelized T1/E1 ATM CEoP SPA LEDs • 24-Port Channelized T1/E1 ATM CEoP SPA Interface Specifications • 24-Port Channelized T1/E1 ATM CEoP SPA Cables and Connectors OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 3-73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172

3-73
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-14
Chapter 3
Overview: Cisco 7600 Series Router Shared Port Adapters
24-Port Channelized T1/E1 ATM CEoP SPA Overview
The 1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs are described in the following table.
1-Port Channelized OC-3 STM1 ATM CEoP SPA Interface Specifications
The physical layer interface for the 1-Port Channelized OC-3 STM1 ATM CEoP SPA is Optical Carrier-3
(OC-3). The 1-Port Channelized OC-3 STM1 ATM CEoP SPA provides one 155.52-Mbps OC-3 network
interface for all supported platforms.
The single SPA port accepts an SFP module with a duplex LC-type receptacle that allows connection to
optical fiber.
1-Port Channelized OC-3 STM1 ATM CEoP SPA Optical Transeiver Modules and
Cables
Cisco Systems qualifies the optics that are approved for use with its SPAs. The 1-Port Channelized OC-3
STM1 ATM CEoP SPA supports the following types of optical transceiver modules:
Multimode (MM) SFP module—SFP-OC3-MM
Short Reach (SR) SFP module—SFP-OC3-SR
Intermediate Reach (IR) SFP module (15 km)—SFP-OC3-IR1
Long Reach (LR) SFP module (40 km)—SFP-OC3-LR1
Long Reach 2 (LR2) SFP module (80 km)—SFP-OC3-LR2
24-Port Channelized T1/E1 ATM CEoP SPA Overview
The following sections describe the 24-Port Channelized T1/E1 ATM CEoP SPA:
24-Port Channelized T1/E1 ATM CEoP SPA LEDs
24-Port Channelized T1/E1 ATM CEoP SPA Interface Specifications
24-Port Channelized T1/E1 ATM CEoP SPA Cables and Connectors
Table 3-44
1-Port Channelized OC-3 STM1 ATM CEoP SPA LEDs
LED Label
Color
State
Meaning
C/A
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software.
Amber
On
Port is enabled by software, and there is at least one alarm.
A/L
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software, loopback is off.
Amber
On
Port is enabled by software, loopback is on.
STATUS
Off
Off
SPA power is off.
Amber
On
SPA power is on and good, and SPA is being configured.
Green
On
SPA is ready and operational.