Cisco 7600 SIP 200 Hardware Installation Guide - Page 129
Preparing to Install a SIP or a Shared Port Adapter, Required Tools and Equipment, Safety Guidelines
UPC - 746320961286
View all Cisco 7600 SIP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
4 C H A P T E R Preparing to Install a SIP or a Shared Port Adapter This chapter describes the general equipment, safety, and site preparation requirements for installing SIPs and SPAs. This chapter contains the following sections: • Required Tools and Equipment, page 4-1 • Safety Guidelines, page 4-1 • Laser/LED Safety, page 4-8 Required Tools and Equipment You need the following tools and parts to install SIPs and SPAs. If you need additional equipment, contact a service representative for ordering information. • Shared port adapter interface processor (SIP) • Shared port adapter (SPA) • SPA Services Card (SSC) • Number 1 Phillips and a 3/16-inch flat-blade screwdriver • Number 2 Phillips screwdriver • Your own electrostatic discharge (ESD)-prevention equipment or the disposable grounding wrist strap supplied with the SIP or SPA • Antistatic mat • Antistatic container • Torque screwdriver with range from 8 to 12 inch-pounds (90 to 135 Newton-centimeters) Safety Guidelines This section provides safety guidelines that you should follow when working with any equipment that connects to electrical power or telephone wiring. OL-5052-14 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide 4-1