Cisco 7600 SIP 200 Hardware Installation Guide - Page 90
OC-192 Module Connections
UPC - 746320961286
View all Cisco 7600 SIP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters Figure 3-36 shows the cable type for use with the XFP optical transceiver module on the 1-Port OC-192c/STM-64 POS/RPR XFP SPA. Figure 3-36 LC-Type Cable for the XFP Optical Transceiver Modules / / / / / / 84929 RX TX Note The 40-pin connector on the 1-Port OC-192c/STM-64 POS/RPR XFP SPA is used for resilient packet ring (RPR) connections. This feature is not supported in. OC-192 Module Connections Table 3-21 shows the OC-192 specifications for use with the 1-Port OC-192c/STM-64 POS/RPR XFP SPA. Table 3-21 OC-192 Specifications Specification Wavelength Cabling distance (maximum) Operating case temperature range Tx Power Receiver Sensitivity (maximum) RX Overload Maximum Receiver Power Damage Description OC-192 SR-1: 1290 nm to 1330 nm OC-192 IR-2: 1530 nm to 1565 nm OC-192 LR-2: 1530 nm to 1565 nm OC-192 SR-1: 2 km (1.2 miles) OC-192 IR-2: 40 km (24.8 miles) OC-192 LR-2: 50 miles (80 km) OC-192 SR-1: 23 to 158 degrees F (-5 to 70 degrees C) OC-192 IR-2: 23 to 158 degrees F (-5 to 70 degrees C) OC-192 LR-2: 23 to 158 degrees F (-5 to 70 degrees C) OC-192 SR-1: -6 dBm -1 dBm OC-192 IR-2: -1 dBm +2 dBm OC-192 LR-2: 0 to +4 dBm OC-192 SR-1: -11 dBm OC-192 IR-2: -14 dBm OC-192 LR-2: -24 dBm OC-192 SR-1: -1 dBm OC-192 IR-2: +2 dBm OC-192 LR-2: -7.0 dBm OC-192 SR-1: +5 dBm OC-192 IR-2: +5 dBm OC-192 LR-2: +5 dBm 3-44 Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide OL-5052-14