Craftsman 536.270320 Operation Manual - Page 12
To Stop, To Set, Parking, Brake, The Throttle - bagger
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
OPERATION HOW TO STOP THE UNIT 1. Completely push the clutch/brake pedal forward to stop the unit. Keep your foot on the pedal. 2. Move the attachment clutch to the DISENGAGE position. 3. Move the speed control lever to the NEUTRAL position. 4. Set the parking brake. _IL unAitR. NING: Make sure the parking brake will hold the 5. Move the throttle control to the SLOW position. 6. To stop the engine, turn the ignition key to the STOP O position. Remove the key. CAUTION: To stop the engine, do not move the choke control to CHOKE position. Backfire or engine damage can occur. HOW TO SET THE PARKING BRAKE 1. Completely push the clutch/brake pedal forward. 2. Lift the parking brake lever (Figure 5). 3. Remove your foot from the clutch/brake pedal and then release the parking brake lever. Make sure the parking brake will hold the unit. 4. To release the parking brake, completely push the clutch/ brake pedal forward. The parking brake will automatically release. Clutch/Brake Pedal WARNING: Before you leave the operator's position, _b mpaorvkeingthebrsahkifet. leMveorveto tthhee neautttarcahl m(Ne)ntposciltuiotcnh. Steot tthhee DISENGAGE position. Stop the engine and remove the ignition key. Figure 5 HOW TO USE THE THROTTLE / CHOKE CONTROL 4. The engine governor is set at the factory for maximum performance. Do not adjust the governor to increase the speed of the engine. CAUTION: Always operate the engine with the throttle control in the FAST position. If the engine runs for several minutes at slower than the FAST position, the engine and transmission will overheat and can be damaged. Use the throttle/choke control to choke the engine for cold starts and increase or decrease the speed of the engine (see Figure 6). 1. Move the throttle/choke control completely forward to the CHOKE position to start a cold engine. 2. The FAST position is marked with a detent. For normal operation and when using a grass bagger, move the throttle control to the FAST position. For maximum charging of the battery and for a cooler running engine, operate the engine in the FAST position. 3. For transport and to tow pull behind attachments, control the ground speed with the speed control pedal. MS-3620MA 12 Throttle Contro Figure 6