Craftsman 536.270320 Operation Manual - Page 34
To Install, Wheels - axle spindle
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
SERVICE AND ADJUSTMENT HOW TO INSTALL THE WHEELS If the wheels must be removed for service, make sure they are installed as follows. Cotter Pin Hocbap X Washer Washer Front Wheel 1. Make sure the valve etem is to the outside of the tractor. Slide the front wheel on the 8pindle (See Figure 42). 2. Fasten the front wheel with washer and cotter pin. Bend the ends of the cotter pin apart to keep the front wheel on the spindle. 3. If your model has hub caps, install the hub cape. Make sure the washers hold the hub caps in place. Valve Stem Spindle Front Wheel Figure 42 Rear Wheel 1. Install the washers Figure 43. and spacer onto the axle as shown in Rear Wheel >f'_'_ Square Key Washer • Key Slot 2. Mount the square key in the key slot (See Figure 43). 3. Make sure the valve etem is to the outside of the tractor, Align the slot in the rear wheel with the square key. Slide the rear wheel on the axle. Hub Oap Spacer 4. Fasten the rear wheel with washer and e-ring 5. If your model has hub caps, install the hub cape. Make sure the washers hold the hub caps in place. E-Ring Valve Stem Figure 43 MS-3620MA 34