Craftsman 536.270320 Operation Manual - Page 15
To Use The, Speed, Control, Lever
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
OPERATION HOW TO USE THE SPEED CONTROL LEVER The Hydrostatic Drive is very easy to operate. The drive system has a a clutch/brake pedal on the left side (see Figure 10) and a speed control lever on the right side (see Figure 11). The speed and direction of travel is controlled lever (see Figure 11). Use the speed control forward or reverse. by the speed control lever to select either HOW TO DRIVE FORWARD 1. The automatic drive disconnect must be in the DRIVE position (Figure 9). 2. Completely push the clutch/brake pedal forward to stop the unit (see Figure 10). Keep your foot on the pedal. 3. Move the speed control lever to NEUTRAL position (see Figure 11). 4. Slowly release your foot from the clutch/brake pedal (see Figure 10). Do not keep your foot on the clutch/brake pedal. 5. Move the throttle control to the FAST position (see Figure 12). 6. Slowly push the speed control lever forward to the desired speed (see Figure 10). To reduce forward speed, slowly pull the speed control lever to the desired speed. HOW TO CHANGE DIRECTIONS / DRIVE IN REVERSE 1. Always disengage blades and look down and behind before and while backing up. 2. Move the speed control lever to the NEUTRAL position (see Figure 11). 3. To go backward, move the speed control lever to the REVERSE position. MS-3620MA 15 J Speed Control Lever \ \ \ \ Figure 11 Throttle Control Lever Figure 12