Craftsman 536.270320 Operation Manual - Page 13
To Use The Attachment, Clutch, Height
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
OPERATION HOW TO USE THE ATTACHMENT CLUTCH Use the attachment clutch to engage the blade (Figure 7). 1. Before you start the engine, make sure the attachment clutch is in the DISENGAGE position. 2. To rotate the blade, move the attachment clutch forward to lock the blade in the ENGAGE position. Note: If the engine stops when you engage the blade(s), the transmission is in reverse. 3. To stop the blade, move the attachment clutch to the DISENGAGE position. Before you leave the operator's position, make sure the blade has stopped rotating. 4. Before you ride the unit across a sidewalk or a road, move the attachment clutch to the DISENGAGE position. 5. Before operating in reverse, move the blade rotation control to the DISENGAGED position. If the blade rotation control is not in the DISENGAGED position, the engine will stop when the speed control pedal/shift lever is moved to REVERSE position. _ WfroAmRNtINheG: blaAdlwe,aydseflkeecetopr yoouprenhinagn,dsanadndthfeeetmaowwaeyr housing when the engine runs. Attachment Clutch Engage Position Figure 7 HOW TO CHANGE THE CUTTING HEIGHT To change the cutting height, raise or lower the lift lever as follows. 1. Move the lift lever forward to lower the mower housing and back to raise the mower housing (Figure 8). 2. When you ride on a sidewalk or road, move the lift lever to the highest position and move the attachment clutch to the DISENGAGE position. MS-3620MA 13 Figure 8