Craftsman 536.270320 Operation Manual - Page 32
To Replace, Mower, Drive
View all Craftsman 536.270320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SERVICE AND ADJUSTMENT HOW TO REPLACE THE MOWER DRIVE BELT 1. Remove the mower housing. See the instructions on "How To Remove The Mower Housing". 2. Pull the belt retainer away from the idler pulley and remove the mower drive belt (Figure 39). 3. Pull the brake pad away from the jackshaft pulley and remove the mower drive belt. NOTE: Replace the mower drive belt with an original equipment belt purchased from a Sears Service Center. 4. Install the new mower drive belt. Pull the brake pad away from the jackshaft pulley. Put the mower drive belt around the jackshaft pulley. 5. Pull the belt retainer away from the idler pulley. Put the mower drive belt around the idler pulley. 6. Make sure the "V" side of the mower drive belt is against the jackshaft pulley and the idler pulley. 7. Install the mower housing. See the instructions Install The Mower Housing". on "How To 8. Before you mow, check the attachment clutch. See the instructions on "How To Adjust The Attachment Clutch". Mower Drive Belt Idler Pulley Belt Retainer Jackshaft Pulley Figure 39 MS-3620MA 32