Dell Dimension 2010 Service Manual - Page 22

Replacing Memory Module(s

Get Dell Dimension 2010 PDF manuals and user guides View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Replacing Memory Module(s) 1 Follow the procedures in "Before You Begin" on page 11. 2 Press out the securing clip at each end of the memory module connector. CAUTION: Do not install ECC memory modules. 3 Align the notch on the bottom of the memory module with the tab in the memory module connector. 4 3 2 1 1 cutouts (2) 3 notch 2 tab 4 memory module CAUTION: To avoid damage to the memory module, press the memory module straight down into the connector while you apply equal force to each end of the memory module. 4 Insert the memory module into the memory module connector until the memory module snaps into position. If you insert the memory module correctly, the securing clips snap into the cutouts at each end of the memory module. 22 Memory Module(s)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
22
Memory Module(s)
Replacing Memory Module(s)
1
Follow the procedures in "Before You Begin" on page 11.
2
Press out the securing clip at each end of the memory module connector.
CAUTION:
Do not install ECC memory modules.
3
Align the notch on the bottom of the memory module with the tab in the
memory module connector.
CAUTION:
To avoid damage to the memory module, press the memory module
straight down into the connector while you apply equal force to each end of the
memory module.
4
Insert the memory module into the memory module connector until the
memory module snaps into position.
If you insert the memory module correctly, the securing clips snap into the
cutouts at each end of the memory module.
1
cutouts (2)
2
tab
3
notch
4
memory module
3
2
1
4