Dell Dimension 2010 Service Manual - Page 27
Replacing PCI and PCI Express Cards - driver
View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1 2 3 4 1 PCI Express x16 card 3 securing tab 2 PCI Express x16 card connector 4 retention mechanism 6 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 7 Replace the computer cover (see "Replacing the Computer Cover" on page 16). 8 Connect the computer and devices to electrical outlets, and then turn them on. 9 Remove the card's driver from the operating system. 10 To complete the removal procedure, see "Configuring Your Computer After Removing or Installing a PCI/PCI Express Card" on page 30. Replacing PCI and PCI Express Cards 1 Follow the procedures in "Before You Begin" on page 11. 2 Remove the computer cover (see "Removing the Computer Cover" on page 15). 3 Prepare the card for installation. PCI and PCI Express Cards 27