Dell Dimension 2010 Service Manual - Page 32
Slide the hard drive out towards the back of the computer.
View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
1 2 3 1 power cable 2 data cable 3 screws (4) CAUTION: Ensure that you do not scratch the screw holes with the screwdriver as the hard disk circuit board assembly is exposed here. 4 Place the computer in an upright position. 5 Remove the four screws that secure the hard drive to the hard drive bay. 6 Slide the hard drive out towards the back of the computer. 7 If removing the hard drive changes the drive configuration, ensure that you reflect these changes in system setup (see "System Setup" on page 69). 32 Drives
32
Drives
CAUTION:
Ensure that you do not scratch the screw holes with the screwdriver
as the hard disk circuit board assembly is exposed here.
4
Place the computer in an upright position.
5
Remove the four screws that secure the hard drive to the hard drive bay.
6
Slide the hard drive out towards the back of the computer.
7
If removing the hard drive changes the drive configuration, ensure that you
reflect these changes in system setup (see "System Setup" on page 69).
1
power cable
2
data cable
3
screws (4)
3
2
1