Dell Dimension 2010 Service Manual - Page 43
Power Switch Module, Removing the Power Switch Module
View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
8 Power Switch Module WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.) removed. CAUTION: Ensure that sufficient space exists to support the system with the cover removed-at least 30 cm (1 ft.) of desk top space. Removing the Power Switch Module 1 Follow the procedures in "Before You Begin" on page 11. 2 Remove the computer cover from both the sides (see "Removing the Computer Cover" on page 15). 3 Remove the front bezel (see "Removing the Front Bezel" on page 19). 4 Remove the hard drive (see "Removing a Hard Drive" on page 31). 5 Disconnect the power switch module cable from power switch module connector (FP1) on the system board. For the location of the connector, see "System Board Components" on page 8. 6 Gently release the hard drive activity light from its holder. 7 Press the holder and rotate it outwards to remove it from the front panel. Power Switch Module 43