Dell Dimension 2010 Service Manual - Page 29
Removing or Installing a PCI/PCI Express Card on To complete the installation
View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
1 2 3 4 1 PCI Express x16 card 3 securing tab 2 PCI Express x16 card connector 4 retention mechanism 6 Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot. 7 Replace the screw that secures the card to the chassis 8 Connect any cables that should be attached to the card. See the documentation for the card for information about the card's cable connections. CAUTION: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 9 Replace the computer cover (see "Replacing the Computer Cover" on page 16). 10 To complete the installation, see "Configuring Your Computer After Removing or Installing a PCI/PCI Express Card" on page 30. PCI and PCI Express Cards 29