Dell Dimension 2010 Service Manual - Page 34
Disconnect the FlexBay USB cable from the Media Card Reader connector, Components
View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2 Remove the computer cover from both the sides (see "Removing the Computer Cover" on page 15). 3 Remove the front bezel (see "Removing the Front Bezel" on page 19). 2 1 1 FlexBay USB cable 2 screws (2) 4 Disconnect the FlexBay USB cable from the Media Card Reader connector on the system board. For the location of the connector, see "System Board Components" on page 8. 5 Remove the two screws that secure the Media Card Reader to the FlexBay slot. 34 Drives
34
Drives
2
Remove the computer cover from both the sides (see "Removing the Computer
Cover" on page 15).
3
Remove the front bezel (see "Removing the Front Bezel" on page 19).
4
Disconnect the FlexBay USB cable from the Media Card Reader connector
on the system board. For the location of the connector, see "System Board
Components" on page 8.
5
Remove the two screws that secure the Media Card Reader to the FlexBay
slot.
1
FlexBay USB cable
2
screws (2)
2
1