Dell Dimension 2010 Service Manual - Page 61
Replacing the System Board
View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Replacing the System Board 1 Gently align the system board into the chassis and slide it towards the back of the computer. 2 Replace the six screws that secure the system board to the chassis. 3 Route and connect the cables that you removed from the system board. CAUTION: Ensure that the processor fan and heat sink assembly is correctly seated and secure. 4 Replace the processor (see "Replacing the Processor" on page 57). 5 Replace the processor fan and the heat sink assembly (see "Replacing the Processor Fan and Heat Sink Assembly" on page 53). 6 Replace the memory modules into the same memory module connector from which you removed them (see "Replacing Memory Module(s)" on page 22). 7 Replace any add-in cards on the system board (see "Replacing PCI and PCI Express Cards" on page 27). 8 Replace the computer cover (see "Replacing the Computer Cover" on page 16). 9 Connect your computer and devices to an electrical outlet, and turn them on. System Board 61