Dell Dimension 2010 Service Manual - Page 55
Processor, Removing the Processor
View all Dell Dimension 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
11 Processor WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.) removed. Removing the Processor 1 Follow the procedures in "Before You Begin" on page 11. 2 Remove the computer cover (see "Removing the Computer Cover" on page 15). CAUTION: Despite having a plastic shield, the processor fan and heat sink assembly may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it. 3 Remove the processor fan and heat sink assembly from the computer (see "Removing the Processor Fan and Heat Sink Assembly" on page 51). NOTE: Unless a new heat sink is required for the new processor, reuse the original processor fan and heat sink assembly when you replace the processor. Processor 55